+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Daytona seat (/showthread.php?tid=4867)
Daytona seat - Chris Goldson_imp - 06-27-2019
Have just bought a Samurider Daytona seat for my 2015 CB1100.
Has anyone fitted one of these and if so do I need to transfer the rubbers from the standard seat and the catches too onto the Daytona seat ?
Best wishes
Chris
RE: Daytona seat - Cormanus - 06-27-2019
Chris, I have a recollection that at least one aftermarket seat required swapping the hardware from the OEM number, but a search has failed to turn up the thread. If you do have to, I can’t imagine it will be too difficult.
Daytona seat - mustakoira_imp - 06-27-2019
I have this seat, and can confirm you do need to transfer the catches from the stock seat to the new seat.
RE: Daytona seat - Chris Goldson_imp - 06-27-2019
(06-27-2019, 11:13 AM)mustakoira_imp Wrote: I have this seat, and can confirm you do need to transfer the catches from the stock seat to the new seat.
Many thanks for your help - much appreciated
RE: Daytona seat - Obleo - 06-28-2019
Ditto on the hardware swap, makes it a little difficult to swap seats quickly. On my Harley my extra seat came with all the correct hardware can do a quick swap,also twice the seat and half the cost. Sundowner is the type.
RE: Daytona seat - motoWest_imp - 01-21-2020
Swapping out the rubber hardware took me longer than I'd like to admit. Getting them off the original seat wasn't too hard, but fitting them into the new seat was . . .annoying. I believe I ended up having to use a little dish soap to ease the way.
RE: Daytona seat - E11even_Hunnit - 01-21-2020
pics?