+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Correct part number for front brake pads (/showthread.php?tid=4860)
Correct part number for front brake pads - Frulk_imp - 10-17-2019
Anybody have the OEM part number handy for front brake pads on a non-abs 2013 ? I’m at the dealership and running into issues.
RE: Correct part number for front brake pads - Frulk_imp - 10-17-2019
No need for number. Once again I made a 40 mile round trip and came home with the wrong pads. I believe I had the parts tech order the correct ones this time.
RE: Correct part number for front brake pads - Lord Popgun - 10-17-2019
Frulk,
Here is the non-abs 2013 fiche for the front brakes. Item 3 https://www.partsfish.com/oemparts/a/hon/511a8da1f870022e4ccd3250/front-brake-caliper
Notice the part number has changed.
RE: Correct part number for front brake pads - Frulk_imp - 10-17-2019
Thanks Popgun. I was surprised to find out after I got home and looked at the 2013 Honda Service Manual that it didn’t list OEM part numbers for common replacement parts.
RE: Correct part number for front brake pads - Randy B - 10-17-2019
06455-MGC-016 x2
RE: Correct part number for front brake pads - jdvalero_imp - 10-24-2019
If you choose to or want to go NON OEM goolge FA296 or FA296HH (SIntered) EBC brake pads are really good. I have them on my bike.
RE: Correct part number for front brake pads - RCalderone_imp - 02-12-2020
(10-24-2019, 09:18 AM)jdvalero_imp Wrote: If you choose to or want to go NON OEM goolge FA296 or FA296HH (SIntered) EBC brake pads are really good. I have them on my bike.
I am considering going EBC FA296HH. Do you find them to be squeaky? Any issues? Thanks!
RE: Correct part number for front brake pads - iamheero_imp - 02-18-2020
(02-12-2020, 11:06 AM)RCalderone_imp Wrote:(10-24-2019, 09:18 AM)jdvalero_imp Wrote: If you choose to or want to go NON OEM goolge FA296 or FA296HH (SIntered) EBC brake pads are really good. I have them on my bike.
I am considering going EBC FA296HH. Do you find them to be squeaky? Any issues? Thanks!
I am considering going EBC FA296HH. Do you find them to be squeaky? Any issues? Thanks!
I have always used the 296hh. In fact, since my '17 brakes were squeaky beforehand (to the point it caused me issues), the FA296hh pads actually helped reduce that significantly. I noticed no squeaking on my '14 when I used them for about 36,000 miles. They're great, I think they have slightly more bite than the OEM pads. A little dusty, but I don't have enough experience with the OEMs to say if it's a big difference.