+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: No weights in my handlebars =/ (/showthread.php?tid=4818)
No weights in my handlebars =/ - ozigoo - 05-12-2020
So when i bought the bike the guy said he had replaced the handlebars back to the original size as when he bought it 3 years earlier it had ,I think he said cb500 bars? on it which were more sporty.
However on closer examination today, it looks like there are no weights inside the bars or any weights on the ends of the bars.
Do other Hondas have the same weights?
If I go to a bike wreckers I doubt there are any CB1100's there.
Not sure if Honda still sell them either or how expensive they would be here.
When I get my post count to 25 I will see if anyone has some 4 sale.
Honda dealers are few and far between here in S.A.
RE: No weights in my handlebars =/ - Lord Popgun - 05-12-2020
You can order that stuff on-line. The handlebar weight assembly isn't really expensive. Partzilla.com is one. I usually use partsfish.com
For example, here is the handlebar/top bridge for the 2014: https://www.partsfish.com/oemparts/a/hon/52f28beff870021404ec5a37/handlebar-top-bridge
RE: No weights in my handlebars =/ - Cormanus - 05-12-2020
Or, in Australia, look here http://www.peterhillhonda.com.au/honda-parts-epc
RE: No weights in my handlebars =/ - ozigoo - 05-12-2020
Cheers guys ,I'll try Peterhill first...
Mines a CB1100A ,theres only a CB1100B listed? anyone know the difference?
RE: No weights in my handlebars =/ - iamheero_imp - 05-17-2020
I bought the CB500f bars previously, the weights from the CB11 bars fit inside IIRC (and vice-versa for sure, I have 500f bars in my cb1100 right now). The 500f weights weigh a little more and I think do a better job dampening vibration than the stock weights.
RE: No weights in my handlebars =/ - ozigoo - 05-20-2020
Cheers , There doesnt seem to be any noticable vibration in the stock bars without the weights so Im reconsidering whether to get them or not...I have some lower bars that I may put on so the CB500f weights might be good for those