The CB1100 Community Forum
Rear Bungee Hook - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Rear Bungee Hook (/showthread.php?tid=4804)

Pages: 1 2

Rear Bungee Hook - Cormanus - 06-07-2020

Part number 90127-MCJ-750 is described as "Bolt, Hook, 8 x 42" There are 4 of them that hold the little rail (described as 'garnish') under the rear of the seat.
[url=https://postimages.org/][Image: d76cb94bfa887b30489e52d643f9c44b.png]

I use a top box and the rack to which it's attached does not allow the use of the OEM bolt as it's about 17mm too short.

Does anyone have any idea where I might get a longer version of the Bolt, Hook or even a fitting I could put over a similar sized bolt to serve the same purpose?

RE: Rear Bungee Hook - pekingduck - 06-07-2020

(06-07-2020, 11:20 AM)Cormanus_imp Wrote: Part number 90127-MCJ-750 is described as "Bolt, Hook, 8 x 42" There are 4 of them that hold the little rail (described as 'garnish') under the rear of the seat.
[url=https://postimages.org/][Image: d76cb94bfa887b30489e52d643f9c44b.png]

I use a top box and the rack to which it's attached does not allow the use of the OEM bolt as it's about 17mm too short.

Does anyone have any idea where I might get a longer version of the Bolt, Hook or even a fitting I could put over a similar sized bolt to serve the same purpose?

The rear bolt on the 2017EX (90127-MGC-JB0) is 55mm long, and is threaded about 15mm. I'm not sure if the turn signals still attach the same way; if the grab rails are removed, these may be long enough.

RE: Rear Bungee Hook - Cormanus - 06-07-2020

Thanks, pekingduck. That's a thought. The 2011 turn signals attach to the garnish and so I'd have to make other arrangements for them if I took it off. But 55mm may gve me enough length. I'll have another look.

RE: Rear Bungee Hook - pekingduck - 06-07-2020

(06-07-2020, 01:59 PM)Cormanus_imp Wrote: Thanks, pekingduck. That's a thought. The 2011 turn signals attach to the garnish and so I'd have to make other arrangements for them if I took it off. But 55mm may gve me enough length. I'll have another look.
It's also nicely chromed, compared to the other ones. bling!

RE: Rear Bungee Hook - Cormanus - 06-07-2020

That’s appealing. My other thought was to buy a bolt with an oversized head and cut a long the of tubing to sit between the edge of the rack and the bold head. It’s really just to stop a bungee slipping off. The Honda ones look good though and the extra bling would be even better.

I had a look and they’re only used in 2017- CBs, which haven’t come near Australia. I suppose I’ll have to get a Honda dealer to get some from Japan.

RE: Rear Bungee Hook - dave - 06-08-2020

Does anyone have any idea where I might get a longer version of the Bolt, Hook or even a fitting I could put over a similar sized bolt to serve the same purpose?
[/quote]
People commonly refer to these bolts as "Frankenstein Bolts". If all you want is a hook for a bungee cord, then how about getting a longer bolt and putting a nut on it to that the nut can be tightened against the frame (or handle) while allowing the longer bolt to extend out?

Rear Bungee Hook - Cormanus - 06-08-2020

Thanks Dave. That’s a good thought too. And it’s good to know what people call them so I can search.

RE: Rear Bungee Hook - Houtman_imp - 06-08-2020

Check Bungee mate from CA at http://WWW.bungeemate.com
I bought a lot of my stuff from them in 2012 , hopefully they are still in business and they have a lot of the things you are looking for.

RE: Rear Bungee Hook - Cormanus - 06-08-2020

Thank you, Houtman. Looks hopeful.

RE: Rear Bungee Hook - peterbaron - 06-08-2020

May these pics help a bit?
Metric thread.

[Image: e15aefe97349da55ec25c2d2108cfc6d.jpg]

[Image: 27a4e7bf37ed238febfaa1630ca44c98.jpg]

[Image: 1358dbf8b81819119f18a1940d18f442.jpg]
Smile