+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Pipe Master 4 into 4 (/showthread.php?tid=4539)
Pipe Master 4 into 4 - Houtman_imp - 12-10-2020
I am thinking of putting the Pipe Master 4 into 4 on my 2014 in the spring . I think that Iamhero did this and I will send him a PM tonight , I am certain that the center stand can be retained : any info anyone ?
RE: Pipe Master 4 into 4 - j3gq_imp - 12-10-2020
Unfortunately no, but please keep us posted, incl. good pictures. I’d really like to see how this will look, from every possible angle.
RE: Pipe Master 4 into 4 - PowerDubs_imp - 12-10-2020
While I personally prefer the Moriwaki 4-4, they both are great sounding.
I'd own one- but don't want to loose the centerstand- I think they both have to have it removed. I could be wrong.
RE: Pipe Master 4 into 4 - Houtman_imp - 12-10-2020
I had to loose the centerstand on my 2013 with the Moriwaki 4 into 4 , not the end of the world as I have 3 Pittbull stands but it would be nice to keep it . I have seen pictures of the Pipe master WITH the center stand but that was on a 2013 and it could be different on a 2014 DLX with the 4 into 2 OEM.
RE: Pipe Master 4 into 4 - Cormanus - 12-10-2020
I thought Pipemasters rendered the centre stand a goner on the 2010-14 STD models. I found a video of iamheero's Pipemasters. he put them on a 2017. here's the video https://www.youtube.com/watch?v=k4LIW7JV9mw. I looks like he kept the centre stand.
I thought I recalled a discussion on the Forum some years ago about fitting Pipemasters to the DLX in which it was reported they couldn't make them without getting their hands on the DLS exhaust. As they were never imported into Australia, it meant someone from the US shipping their exhaust to Australia. It didn't happen. As I wrote that. though, it occurred to me it may have been Staintune.
RE: Pipe Master 4 into 4 - Houtman_imp - 12-10-2020
It looks that the center stand is still on his 2017 , so perhaps it could stay on with the 2014 as well.
RE: Pipe Master 4 into 4 - Cormanus - 12-10-2020
It looks like the leg is sitting a little low. I wonder whether he had to fabricate a new stopper?
RE: Pipe Master 4 into 4 - iamheero_imp - 12-10-2020
Hi, I can confirm I have the Pipemasters set, although I didn't install them- the previous owner did (and sold it with under 1,000 miles!). The center stand is retained and works as stock. I believe no new stoppers were necessary although if I recall from when I was last under there (just did a chain replacement about a month ago) it does rest on the pipes themselves! That was disconcerting but has done so for the 24,000 miles I've put on it since I got it last year and shows no signs of wear or melting.
RE: Pipe Master 4 into 4 - Houtman_imp - 12-10-2020
(12-10-2020, 03:46 PM)iamheero_imp Wrote: Hi, I can confirm I have the Pipemasters set, although I didn't install them- the previous owner did (and sold it with under 1,000 miles!). The center stand is retained and works as stock. I believe no new stoppers were necessary although if I recall from when I was last under there (just did a chain replacement about a month ago) it does rest on the pipes themselves! That was disconcerting but has done so for the 24,000 miles I've put on it since I got it last year and shows no signs of wear or melting.
Thank you for your post , I send you a PM
RE: Pipe Master 4 into 4 - The A-man - 12-11-2020
Let me know if you need a hand installing them. There's nothing more fun than getting your hands dirty on a motorcycle!