+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: going back to stock muffler and other parts (/showthread.php?tid=4355)
going back to stock muffler and other parts - Tom_imp - 08-25-2022
I am back on the road. I replaced my wrecked 2013 standard with another 2013 standard. The new one has a yoshimura muffler. I also have the stock one and want put it back on. Pretty straight forward job or more that meets the eye? I also would like original grips. Best place to get them? It idles high too but I'll start another thread for that.
RE: going back to stock muffler and other parts - Cormanus - 08-25-2022
Congratulations on the new bike, Tom.
RE: going back to stock muffler and other parts - the Ferret - 08-25-2022
if you put... high idle.... in the forum search engine at the rh top of the page, you will find several threads
RE: going back to stock muffler and other parts - Lord Popgun - 08-25-2022
Yeah, read the high/low idle threads like Ferret said. You won't be real happy doing that job.
Exhaust stuff is not a big deal.
RE: going back to stock muffler and other parts - GoldOxide_imp - 08-26-2022
Very good Tom - congratulations!
RE: going back to stock muffler and other parts - rboe - 08-26-2022
The only wrinkle I can think of; if you have it installed, is removing the little bracket that is the new center stand stop. Bit of a PITA to install, don't see it being easier to remove.
But the silencer its' self should be easy peasy.