+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6)
+--- Thread: R&G muffler protector (/showthread.php?tid=2016)
R&G muffler protector - Mikestib1_imp - 12-07-2016
Should have bought one before I went down at 5 mph. Anyhow ordered one from Revzilla to cover the spot that got nicked. Will see if it works. Says it fits round mufflers up to 5.5 inches diameter which is about right.
RE: R&G muffler protector - Ulvetanna_imp - 12-07-2016
I like R&G Racing quality; installed a protection package on my ZX-10R after it got knocked over. Only damage was the frame but I got to thinking, since they were tearing the whole bike apart to replace the frame, why not install additional protection? Really nice stuff, very highly rated. GB also makes good stuff.
RE: R&G muffler protector - Mikestib1_imp - 12-07-2016
Their products look top rate. Hope it fits as 5.5 inches is as far out as it can be adjusted. I think they're a Brit company.
RE: R&G muffler protector - Ulvetanna_imp - 12-07-2016
(12-07-2016, 08:01 AM)Mikestib1_imp Wrote: Their products look top rate. Hope it fits as 5.5 inches is as far out as it can be adjusted. I think they're a Brit company.Yes, British.
RE: R&G muffler protector - DAC - 12-07-2016
R&G is high quality stuff. Had their sliders on my VFR which, sadly, required cutting a hole in the plastic. Their sliders are on my CB as well.
RE: R&G muffler protector - Mikestib1_imp - 12-09-2016
Received it today. It's a perfect fit. I measured before I purchased. Covers where I trashed the muffler great.
RE: R&G muffler protector - aschem_imp - 03-22-2017
Going to order this for my Moto Gear Titanium exhaust; where would be the ideal place to locate? Do I measure closet spot to the ground?
RE: R&G muffler protector - c-breezy_imp - 03-22-2017
Mike, can we see a pic?
RE: R&G muffler protector - Lord Popgun - 03-22-2017
Here is a link to them at Revzilla. I would think it is the round one. https://www.revzilla.com/search?query=+muffler+protector&commit=Search
RE: R&G muffler protector - aschem_imp - 03-24-2017
I just ordered it, and I also ordered the T-Rex front axle sliders. Will post pics when I install.