+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6)
+--- Thread: Clutch and Brake Lever Adjustment (/showthread.php?tid=1884)
Clutch and Brake Lever Adjustment - retroman_imp - 07-03-2013
This may have already been addressed in a different thread. Does anyone know the factory settings for the clutch and brake lever adjustment dials? Thanks
RE: Clutch and Brake Lever Adjustment - Scoobynut_imp - 07-03-2013
(07-03-2013, 02:29 AM)retroman_imp Wrote: This may have already been addressed in a different thread. Does anyone know the factory settings for the clutch and brake lever adjustment dials? Thanks
Retro, I don't remember what mine were set at when I took delivery of the bike, but I would say to just set them to what works for your personal preference and hand size.
RE: Clutch and Brake Lever Adjustment - the Ferret - 07-03-2013
Don't remember factory settings either, but I set my clutch on 5 and my brake on 3
RE: Clutch and Brake Lever Adjustment - NightRider_imp - 06-18-2017
How is the adjustment made? Pull the lever in and move the adjustment dial somehow?
RE: Clutch and Brake Lever Adjustment - the Ferret - 06-18-2017
Push lever out about 1/4 inch and rotate dial. Look for little arrow head and put it next to number on dial.
RE: Clutch and Brake Lever Adjustment - Lord Popgun - 06-18-2017
Interesting Ferret, my brake is 2 and my clutch is 4
The service manual says to set both to 2. I would imagine that is the factory setting.
RE: Clutch and Brake Lever Adjustment - NightRider_imp - 06-18-2017
(06-18-2017, 04:45 AM)The ferret_imp Wrote: Push lever out about 1/4 inch and rotate dial. Look for little arrow head and put it next to number on dial.
Thanks much. That works.