+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+---- Forum: How To . . . (https://cb1100forum.net/forum/forumdisplay.php?fid=23)
+---- Thread: Replacing O ring on front turn signal base (/showthread.php?tid=14816)
Replacing O ring on front turn signal base - HondaLou - 07-01-2026
I am replacing several front-end parts on my "new" 2014 CB1100 DLX. One item I came across was torn rubber O rings between the black base of the front turn signal and mounting bracket. Honda dealers list this part as BAND, BOOT (D27) 91302-HM7-A00 - same as on the 2013 model as well. Price is listed as $7-$10 per ring !!!
Well ... Ace Hardware has this part in their plumbing section for $1 each. I tried Lowes and Home Depot, but their O rings were too thick, too small or too large.
Here are the photos of the Honda part, the Ace hardware part and the final install.
It was a perfect fit.