The CB1100 Community Forum
New Fork Brace - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: New Fork Brace (/showthread.php?tid=14456)

Pages: 1 2

New Fork Brace - Uncle Sixer - 07-14-2025

So... my fork brace got here today.  It is very generic, comes from SFriding, I am a little embarrassed to say I found it on Amazon, but it was only $80 and I figured if it was a piece of junk I would just send it back.

Well, it is more robust than it looked in the pictures and the tolerances seemed excellent so I went ahead and mounted it... and then it has been raining most of the rest of the day.  I didn't take time to weigh it, but it is light enough I am not going to care.  

I figured I would post a picture.  

Only problem is now the back end is jealous of the front end Al treatment and I just found out about the Over Racing Al swingarm for our bikes (but man, that's a lot of loot).

   

   

RE: New Fork Brace - rdprdp01 - 07-14-2025

I also have a fork brace (SuperBrace), and I believe it has helped motorcycle handling at all speeds and reducing brake squeal. Sadly, SuperBrace is no more, but the impact of their good work can be felt every time I ride.

Congrats on finding a fork brace that will fit. It is becoming more difficult to source one! David

[Image: zlr5ZUr.jpeg]

RE: New Fork Brace - tdbru - 07-14-2025

Very cool fork brace.  but I went for more retro look.  put fork gaiters on.  I suspect with fork gaiters on, a fork brace won't also fit on as well.  but either fork brace sure look cool.  congrats!
-tdbru

RE: New Fork Brace - Lord Popgun - 07-15-2025

Six,

I like your new fork brace. It appears to be a close copy of the Agras brace that I have. I think you will be happy!

RE: New Fork Brace - Uncle Sixer - 07-17-2025

I got a good 2 hour ride in on the new fork brace today.  Honestly, prob not much of a difference at the speeds and forces I am turning with right now.  I have been away from riding for about 15 years, so although I had a lot of experience back in the day, I am not riding the way I did in my 20s (for a lot of reasons).

But, I do think a 500lb motorcycle should have more than just a fender bridging the fork sliders down there, so even if it is just psychological, I like having it on.  Hopefully as I get more new miles behind me my lean angle confidence continues to improve.

For anyone looking for a brace, I would recommend this one from SFriding.  It fits very precisely and appears to be well-engineered.  The Al is thick enough that I have confidence it will eliminate flex within reason.  Weight is decent, hardware is solid.

Last thing...  I pulled over for a moment to get this fellow off the hot pavement...        

RE: New Fork Brace - MagnaRider - 07-17-2025

Can you post a link for the brace?

RE: New Fork Brace - peterbaron - 07-17-2025

(07-17-2025, 01:17 PM)Uncle Sixer Wrote: ..........................
Last thing...  I pulled over for a moment to get this fellow off the hot pavement...

 you did a good job!!

RE: New Fork Brace - Lord Popgun - 07-17-2025

https://www.amazon.com/SFriding-Front-Brace-Stabilizer-CB1100/dp/B0DKDVY4GG/ref=sr_1_3?crid=GNA42GMT3PFZ&dib=eyJ2IjoiMSJ9.uRp9wKOfvgniwt44ZoTNRBNOPmMlsjcb5m0q8dDnQFIZqgFtDaSqQee3KtpYSMBUpXRnSlukpLZmOnZe53DUDcNvDc10JB-f4BFNBrd__8UyyczUE_9vHb7D1_b44E6aBbeRJCSK9pA0UJCgmB1wLLGNEImZh5HIkuQyisReDzdi3o3tVNmwmkSNuqpR4wWqeG8jj3cPT9sJP_B0b3X2VwVf6dKUgWgJdEHmmWsA1NwUUktgeXFaZQNCe3XjhSJVX9vEm35gMwFj4cXHN0KxrYHHqPttjaifRZiUDkYzK2k.bnJPqNPYjPiUp36-QemYz41LVI5g9ssQ12M7tHsy210&dib_tag=se&keywords=sfriding%2Bfork%2Bbrace&qid=1752780663&sprefix=sfriding%2Bfork%2Bbrace%2Caps%2C88&sr=8-3&th=1

RE: New Fork Brace - MagnaRider - 07-17-2025

(07-17-2025, 01:31 PM)Lord Popgun Wrote: https://www.amazon.com/SFriding-Front-Brace-Stabilizer-CB1100/dp/B0DKDVY4GG/ref=sr_1_3?crid=GNA42GMT3PFZ&dib=eyJ2IjoiMSJ9.uRp9wKOfvgniwt44ZoTNRBNOPmMlsjcb5m0q8dDnQFIZqgFtDaSqQee3KtpYSMBUpXRnSlukpLZmOnZe53DUDcNvDc10JB-f4BFNBrd__8UyyczUE_9vHb7D1_b44E6aBbeRJCSK9pA0UJCgmB1wLLGNEImZh5HIkuQyisReDzdi3o3tVNmwmkSNuqpR4wWqeG8jj3cPT9sJP_B0b3X2VwVf6dKUgWgJdEHmmWsA1NwUUktgeXFaZQNCe3XjhSJVX9vEm35gMwFj4cXHN0KxrYHHqPttjaifRZiUDkYzK2k.bnJPqNPYjPiUp36-QemYz41LVI5g9ssQ12M7tHsy210&dib_tag=se&keywords=sfriding%2Bfork%2Bbrace&qid=1752780663&sprefix=sfriding%2Bfork%2Bbrace%2Caps%2C88&sr=8-3&th=1

Thanks, that's the one I found but I was surprised it says it fits a 2012 and 2013 model and UncleSixer has a 2014. 
I can't imagine they changed anything between '13 and '14?

Either way I like the idea of it and I think it should fit over my fork gaiters.

RE: New Fork Brace - Lord Popgun - 07-17-2025

Yeah, I think the fork specs are the same.


I will say I too have come across turtles in the road in the rural part of our city. But they were snapping turtles and I’m not helping them do anything. YMMV Smile