Exhaust Build - Printable Version

Exhaust Build - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: CB1100 Reference (https://cb1100forum.net/forum/forumdisplay.php?fid=10)
+--- Forum: CB1100 Photos & Videos (https://cb1100forum.net/forum/forumdisplay.php?fid=49)
+--- Thread: Exhaust Build (/showthread.php?tid=14345)

Exhaust Build - 1973cb750 - 05-06-2025

Hey peeps This is my first rendition will probably make some changes and redesigns, I bout a new tig welder a few months back and this is a prototype as one would have it

[Image: ioDaEgG.jpeg]

a little practice i have plenty of experience welding just not much tig maybe 2 hours total but ill get their

this is a 9200 rpm fly by

[Image: SwrtGmj.jpeg]

RE: exhaust build - 1973cb750 - 05-06-2025

RE: Exhaust Build - pdedse - 05-06-2025

Sounds like its fun to ride. If this is a prototype, how will final version be different?

RE: Exhaust Build - 1973cb750 - 05-06-2025

(05-06-2025, 09:13 AM)pdedse Wrote: Sounds like its fun to ride. If this is a prototype, how will final version be different?

I would like to do a 2.5" from the header to the tip this is 2" im hoping to get a lower tone and next time i want to build a better baffle im gona start getting some parts ordered in to start that one piece at a time as the song goes

also this is 20 gauge like .039" wall pipe while light is very hard to work with next one will be 16 gauge easier to weld

RE: Exhaust Build - MagnaRider - 05-06-2025

That sounds awesome! Great job!

RE: Exhaust Build - 1973cb750 - 05-06-2025

(05-06-2025, 09:34 AM)MagnaRider Wrote: That sounds awesome! Great job!

has a very close to cb750 note i love the noise and its mellow when at low rpm

RE: Exhaust Build - 1973cb750 - 06-23-2025

[Image: 5Gi3phR.jpeg]

a dlx i had the pleasure of flashing and taking for a buzz around the block