+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Other Stuff (https://cb1100forum.net/forum/forumdisplay.php?fid=16)
+--- Forum: Riding Gear (https://cb1100forum.net/forum/forumdisplay.php?fid=18)
+--- Thread: tightening a helmet (/showthread.php?tid=14127)
tightening a helmet - misterprofessionality - 09-18-2018
Not even sure if this is possible, just a theory, but has anybody had experience with making a helmet fit much tighter by upgrading/thickening the padding? I have a helmet that I like, but it's probably a little loose. the looseness didn't bother me until I attached my helmet cam and saw that the video is very shaky at higher speeds, due to the wind jostling the helmet constantly. the helmet is snug enough to be safe, but I'd like to keep my video nice and stable so that i can read license plates when somebody inevitably tries to kill me.
so, is snugging up a helmet by increasing the pad thickness a thing I can do or is that not possible? Has anybody ever done this?
RE: tightening a helmet - Lord Popgun - 09-18-2018
What helmet? Shoei has different size cheek pads. They just snap in/out.
RE: tightening a helmet - misterprofessionality - 09-18-2018
It's a Bell, I think a Qualifier by the inner tags. I've been looking at the available pads, they seem to have cheek pads that read as 45mm, but according to the bell website, mine has 40mm already. i'm not sure that's enough to make a difference. maybe aftermarket pads?
RE: tightening a helmet - Houtman_imp - 09-18-2018
Just put on some weight and it will fit better !
Donuts and ice cream work very well to make a helmet fit tighter.
RE: tightening a helmet - Lord Popgun - 09-18-2018
I don’t know. Hopefully someone else will know and post up.
RE: tightening a helmet - misterprofessionality - 09-18-2018
i think it would take an awful lot of doughnuts to make my *head* fatter. besides, i don't think i could cope with the loss in acceleration :-p
RE: tightening a helmet - LongRanger_imp - 09-18-2018
We can give you lots and lots of compliments and tell you how wonderful you are. That'll make your head swell.
Seriously, aside from thicker pads, I'm not sure what options you have.
RE: tightening a helmet - misterprofessionality - 09-18-2018
That's what I'm thinking as well. the Bell qualifier helmet, when sold in XS (the size i probably would have bought had I bought this helmet myself), comes with a 50mm thick pad. they don't seem to sell this separately on their website, so i'm asking the good people at Bell by email. for the pads on the top, i might stuff the helmet some between the pad and the shell to make it more snug up top. if that doesn't minimize movement, i don't know what will.
RE: tightening a helmet - Cormanus - 09-18-2018
MrP, someone here recently posted about the wonders of renewing the padding in their helmet. [url=http://cb1100forum.com/forum/showthread.php?tid=13349]Here it is.
It occurs to me you may also find that 5mm either side (which is a 10mm reduction in width) makes more difference than you think, particularly if the helmet is a bit worn.
RE: tightening a helmet - Houtman_imp - 09-18-2018
Perhaps there is a cap you could put on your head before you put your helmet on .
Aerostich has some in their catalog.