+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: CB1100 Reference (https://cb1100forum.net/forum/forumdisplay.php?fid=10)
+--- Forum: CB1100 Photos & Videos (https://cb1100forum.net/forum/forumdisplay.php?fid=49)
+--- Thread: GoPro Mount (/showthread.php?tid=12890)
Pages:
1
2
GoPro Mount - Michael252_imp - 08-20-2013
I mounted my GoPro to the 1100 last weekend for my first attempt at video. I mounted it between the handlebar brackets, but I think I had too many of those GoPro links/brackets in it. My video was horribly jiggly. Can maybe one of you guys post how/where you mount your GoPro on the 1100?
Thanks,
Michael
RE: GoPro Mount - Joola_imp - 08-20-2013
Suction cup mount right on the front fender. Works like a charm.
RE: GoPro Mount - gcarper_imp - 08-20-2013
(08-20-2013, 04:28 AM)Michael252_imp Wrote: I mounted my GoPro to the 1100 last weekend for my first attempt at video. I mounted it between the handlebar brackets, but I think I had too many of those GoPro links/brackets in it. My video was horribly jiggly. Can maybe one of you guys post how/where you mount your GoPro on the 1100?
Thanks,
Michael
I put a ram mount ball on the right handlebar and a short clamp to the camera mount. Here is the link to a video. I like showing the tach and speedo.http://youtu.be/JoHYQsqR2Sc
RE: GoPro Mount - vfrpaul98_imp - 08-20-2013
http://youtu.be/BeuRpsMZnPc
helmet mounted, gopro sticky mount at lower left side of helmet
Paul.
RE: GoPro Mount - Michael252_imp - 08-20-2013
Thanks, guys.
I made another attempt last night. I removed a link or two and remounted, but it's a little low now. I got too much speedo and tach. But the image was much more steady.
Any chance of getting pictures of how your mounts fit?
RE: GoPro Mount - Guth_imp - 08-21-2013
Yet another option: the GoPro Chest Mount Harness.
RE: GoPro Mount - the Ferret - 08-21-2013
I like the view from VFRPauls set up.
RE: GoPro Mount - gcarper_imp - 09-10-2013
I use the helmet mount a lot but I really like the handle bar mount on the CB as the speedo and tach can be included. One tip on the GoPro mounts, they can move around enough to introduce jiggle into the videos, slip a tie wrap end into the area between the mount on the bike/helmet and the mount attached to the camera. And you're learning that the less between the camera and mount on the bike/helmet the better. Here is my latest video shooting from the rear and on the handle bars. http://youtu.be/-uglL0usbCM
RE: GoPro Mount - gcarper_imp - 09-11-2013
(08-21-2013, 01:55 PM)Guth_imp Wrote: Yet another option: the GoPro Chest Mount Harness.
I like that chest mount, looks like GoPro gets another purchase from me.
RE: GoPro Mount - Smiler_imp - 09-12-2013
Hi
I use one of these mounts, it just about opens out enough to fit on the frame tubes
http://www.ebay.co.uk/itm/350867979251
Have taken two vids so far
http://www.youtube.com/watch?v=EOVFQXN4WH0
http://www.youtube.com/watch?v=40IXL-SUtds
Bill