The CB1100 Community Forum
SIDE COVERS - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: CB1100 Reference (https://cb1100forum.net/forum/forumdisplay.php?fid=10)
+--- Forum: CB1100 Photos & Videos (https://cb1100forum.net/forum/forumdisplay.php?fid=49)
+--- Thread: SIDE COVERS (/showthread.php?tid=12514)

SIDE COVERS - CBMALTA_imp - 02-23-2015

Hi, I'm hoping that someone can help me. I'm making a cafe racer from a 1977 Honda CB750 and the frame looks very similar to the CB1100.
I would like to see if I can fit the CB1100 side covers on the CB750.
Can someone help me out by giving me the measurements of one of the side covers?
I want to be sure they can fit before ordering.
Best Regards
Rene

RE: SIDE COVERS - Damfino_imp - 02-24-2015

(02-23-2015, 05:48 PM)CBMALTA_imp Wrote: Hi, I'm hoping that someone can help me. I'm making a cafe racer from a 1977 Honda CB750 and the frame looks very similar to the CB1100.
I would like to see if I can fit the CB1100 side covers on the CB750.
Can someone help me out by giving me the measurements of one of the side covers?
I want to be sure they can fit before ordering.
Best Regards
Rene

Can anyone help Rene out. Both my bikes are in winter storage and I can't get to them at least for another month. Mickey?

RE: SIDE COVERS - the Ferret - 02-24-2015

The 13 (triangular) and 14 side covers (rectangular looking but actually rectangular with a triangle "tail" that's black) are different and I would think it would be hard to give you any measurements that you could use. I measured mine (14 dlx) at 12" at the widest part across the top and 8 1/2 " from top to very bottom but hardly see how those measurements would tell you anything? I would think a trip to a dealer with a big sheet of paper and a pencil to trace around it and a ruler to measure mount points etc would be your best bet.

RE: SIDE COVERS - ClassicVW_imp - 02-24-2015

I would also think that measuring and then communicating the measurements would be less than accurate.
Maybe someone who has replaced their covers with a different color could send him a set to use for measurements and then he could return them?

RE: SIDE COVERS - the Ferret - 02-24-2015

Could somebody measure as best they could the front and rear sides of the side panels on a 13 model? My 14 has a rectangular front side but the back measures 9 3/4" as best I can measure. CBmalta is interested in the triangular shaped ones off of a 13.. His problem is CB1100s are not imported to Malta.

[url=http://s1068.photobucket.com/user/cbfmalta/media/force-020_2_zpsu81y4s8d.jpg.html][Image: 62408b2001e29fa6606eba50ff7d30e1.jpg]




.

RE: SIDE COVERS - the Ferret - 02-25-2015

Anybody?

RE: SIDE COVERS - AllenM_imp - 02-25-2015

I will post the information in a few hours.
(02-25-2015, 12:54 AM)The ferret_imp Wrote: Anybody?


RE: SIDE COVERS - the Ferret - 02-25-2015

Thanks Allen

RE: SIDE COVERS - AllenM_imp - 02-25-2015

I took pictures holding a ruler next to the cover. They are on the attached pdf. You may need to zoom on the pdf to see better.

[Image: 1845101f23243ea122e66762df960d50.gif] [url=attachment.php?aid=2452]Cover.pdf (Size: 223.56 KB / Downloads: 39)

RE: SIDE COVERS - the Ferret - 02-25-2015

Thanks Allen. I sent CBMalta a pm telling him to check here