![]() |
|
Looking for a picture,need some help. - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6) +--- Thread: Looking for a picture,need some help. (/showthread.php?tid=1172) |
Looking for a picture,need some help. - FLYTYM_imp - 01-30-2019 Can somebody post a picture of the grab rail brackets under the seat for a 2014 Deluxe? RE: Looking for a picture,need some help. - Desert viper_imp - 01-30-2019 Mine are off right now as I’m installing Whitehouse K10 turn signals and removing the rack.....I just emailed you about shocks... RE: Looking for a picture,need some help. - FLYTYM_imp - 01-30-2019 What I’m getting at here is I put a DELUXE seat on my STANDARD,while it does fit the back of the seat sits on the rear of the grab bars. I did some digging AFTER I got the seat and realized something wasn’t right so I started making some brackets to relocate the grab bars then out of curiosity I checked out a schematic between the 2 bike and found the bracket I was about to make,Honda sells it. If you look at a side profile of the Standard and the Deluxe you will see the seat on the Standard has an angle at the bottom edge while the Deluxe is straight. I’ve ordered the brackets and all the hardware from Honda, hope I didn’t waste MORE money of parts I don’t need. |