The CB1100 Community Forum
My perfect day - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Seat Time (https://cb1100forum.net/forum/forumdisplay.php?fid=9)
+--- Thread: My perfect day (/showthread.php?tid=11022)

Pages: 1 2

My perfect day - peterbaron - 08-05-2021

Yesterday, I heard the purr of my white CB so I took her out for a 521kms/323 mile ride to Tobermory, ON.
I love this route/region, and been there multiple times, by bike and car.

https://www.google.ca/search?source=univ...66&bih=657

[url=https://www.google.ca/maps/dir/Brampton,+ON/Tobermory,+ON/@44.4846407,-81.8334288,8z/data=!3m1!4b1!4m13!4m12!1m5!1m1!1s0x882b15eaa5d05abf:0x352d31667cc38677!2m2!1d-79.7624177!2d43.7315479!1m5!1m1!1s0x4d2d0ba9fb4f9461:0x3b2e70b0e46a3526!2m2!1d-81.6645411!2d45.2533625]https://www.google.ca/maps/dir/Brampton,+ON/Tobermory,+ON/@44.4846407,-81.8334288,8z/data=!3m1!4b1!4m13!4m12!1m5!1m1!1s0x882b15eaa5d05abf:0x352d31667cc38677!2m2!1d-79.7624177!2d43.7315479!1m5!1m1!1s0x4d2d0ba9fb4f9461:0x3b2e70b0e46a3526!2m2!1d-81.6645411!2d45.2533625

[Image: d95113726d025bec70cae14874a6bd0a.jpg]

Weather was so perfect; warm, sunny, minimal wind/traffic and new pavement for almost half a distance.

Gassed her up on a side stand and I rode cruising 80-100 kms/h, just under 2900rpm/min, mostly in 6th, so fuel consumption was minimal.
I just couldn't believe, I made my round trip/521 kms with one tank ( I have DLX/Japanese EX size of about 17-18 L). My previous record was 495 kms.
If I did fill up while on centre stand, I would assume, I could hit 550 kms under these circumstances....and this is my new challenge possible this Friday.
Normally, freeway rides at a higher speed will let me make slightly over 300 kms.

[Image: 7e3f5efec4a8e47748c7dbdb73f92fcd.jpg]

[Image: aed345bf7951fb7e4f78b7e665914e8e.jpg]

When I came back home, there were two surprises at the door step, both for my DLX, front fender extender and side stand enlarger, professionally made for CB1100.

[Image: 8c6687c64b1787dc5b5b3a63386d7899.jpg]
Biker

RE: My perfect day - Gone in 60 - 08-05-2021

That is a good day!

Just a note on the fender extender - I attached mine with 3M grey mounting tape, and didn't drill my fender for additional screws or whatever they recommended. Has held just fine ever since.

RE: My perfect day - peterbaron - 08-05-2021

(08-05-2021, 03:37 AM)Gone in 60_imp Wrote: That is a good day!

Just a note on the fender extender - I attached mine with 3M grey mounting tape, and didn't drill my fender for additional screws or whatever they recommended. Has held just fine ever since.

No drilling at all.
For my '13 & '14, I used epoxy, so will repet it again for my DLX.
Beer

RE: My perfect day - Rocky_imp - 08-05-2021

(08-05-2021, 03:43 AM)peterbaron_imp Wrote:
(08-05-2021, 03:37 AM)Gone in 60_imp Wrote: That is a good day!

Just a note on the fender extender - I attached mine with 3M grey mounting tape, and didn't drill my fender for additional screws or whatever they recommended. Has held just fine ever since.

No drilling at all.
For my '13 & '14, I used epoxy, so will repet it again for my DLX.
Beer

No drilling at all.
For my '13 & '14, I used epoxy, so will repet it again for my DLX.
Beer
I used marine grade JB Weld. I did the same on my '02 900F and it has never moved in nearly 20 years. This is a great mod to help keep crap off the engine.
That "foot" looks interesting. Tell us more about it.
Nice ride too.

RE: My perfect day - peterbaron - 08-05-2021

Rocky, read this post +++
http://cb1100forum.com/forum/showthread.php?tid=15838&highlight=side+stand+enlarger

This one, I just received fits 2014-16, will not fit the '13, '17 and up models???
I think, I bought the last one but they will make one for you, just longer waiting time.

Webike
https://japan.webike.net/products/23177688.html

P.S. I know the price is b**ch Angry

RE: My perfect day - GoldOxide_imp - 08-05-2021

(08-05-2021, 03:37 AM)Gone in 60_imp Wrote: That is a good day!

Just a note on the fender extender - I attached mine with 3M grey mounting tape, and didn't drill my fender for additional screws or whatever they recommended. Has held just fine ever since.

I put one of these babies on the 2018 Honda NC750X. Meh, ... it helped maybe by reducing the chaos by half. But 3M grey VHB is the best choice.

RE: My perfect day - Rocky_imp - 08-05-2021

(08-05-2021, 05:39 AM)peterbaron_imp Wrote: Rocky, read this post +++
http://cb1100forum.com/forum/showthread.php?tid=15838&highlight=side+stand+enlarger

This one, I just received fits 2014-16, will not fit the '13, '17 and up models???
I think, I bought the last one but they will make one for you, just longer waiting time.

Webike
https://japan.webike.net/products/23177688.html

P.S. I know the price is b**ch Angry

Thanks for that. Good info Thumbs Up Thumbs Up

RE: My perfect day - the Ferret - 08-05-2021

That's awesome PB

Wow... 323 miles on 4.55 gals of gas is over 70 mpg, that's awesome.

I once got 78 mpg (164 mi on 2.1 gals) while riding in the Rockies with Longranger and Offroad

RE: My perfect day - Houtman_imp - 08-05-2021

The side stand enlarger did fit my 2013 and 2014 but not my 2017 as that foot is too narrow.

RE: My perfect day - peterbaron - 08-05-2021

Honda online parts catalog lists side stands as follows:

2013 AC & A-AC - s/stand P/N 50530-MGC-000

[Image: 4f695af228e8ad9c5af8ce57b6f4a7a0.jpg]
2014 AC & SA AC - s/stand P/N 50530-MGC-315 - ^^this is - DI-SSE-HO-08-T^^ the one I bought and it did not fit my '13 modal, as the s/stand platform is larger than '14 .
The last letter stands for colour: T-titanium, B-black, G-gold.
Also I believe that '13 s/stand is 1/2-3/4" longer.

2017 CA AC & NA AC s/stand P/N 50530-MGC-JB1

Make your own decision prior ordering.