+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Super Brace fork stabilizer (/showthread.php?tid=10900)
Super Brace fork stabilizer - redReno_imp - 06-08-2013
I have some good news for popgun if he is still interested in buying this product.
Here is the link to the thread he started and what he wrote.
http://cb1100forum.com/forum/showthread.php?tid=40
I met up with Scott at their shop in Huntington Beach, CA
He was a really nice guy.
He took the measurements and then we talked about the bike for quite a bit ha.
Now that they personally have taken the measurements, they will make a prototype which will take 2-3 weeks because they are also working on prototypes for two other bikes.
Once they are finished with it, they are going to call me back and fit it to the CB11, if it is a perfect fit, they will leave it on and let me ride with it until they have the final product ready.
The only options available will be Polished Aluminum or Anodized Black.
I'm thinking about going with the black.
The only problem he sees is the brace might hit the...two round thing-a-ma-jigs?? Those are for the horn right????
Because of the marks on my forks and explained I might have to move them up a bit.
The cables should be fine where they are at.
[url=http://imageshack.us/photo/my-images/826/photo8iu.jpg/]
He asked me if I ride it or brake really hard and I told him about the other day...
I took a route home I've never taken before and the paved road went to dirt and gravel, the front end ended up hitting part of the road pretty hard. I'm guessing that's where those marks came from.
I'll let you all know how the bike performs and if I have any problems with it once I have the prototype fitted.
RE: Super Brace fork stabilizer - Lord Popgun - 06-08-2013
(06-08-2013, 05:25 AM)redReno_imp Wrote: I have some good news for popgun if he is still interested in buying this product.
Here is the link to the thread he started and what he wrote.
http://cb1100forum.com/forum/showthread.php?tid=40
popgun_imp pid="0" dateline=" Wrote:
I met up with Scott at their shop in Huntington Beach, CA
He was a really nice guy.
He took the measurements and then we talked about the bike for quite a bit ha.
Now that they personally have taken the measurements, they will make a prototype which will take 2-3 weeks because they are also working on prototypes for two other bikes.
Once they are finished with it, they are going to call me back and fit it to the CB11, if it is a perfect fit, they will leave it on and let me ride with it until they have the final product ready.
The only options available will be Polished Aluminum or Anodized Black.
I'm thinking about going with the black.
The only problem he sees is the brace might hit the...two round thing-a-ma-jigs?? Those are for the horn right????
Because of the marks on my forks and explained I might have to move them up a bit.
The cables should be fine where they are at.
[url=http://imageshack.us/photo/my-images/826/photo8iu.jpg/]
He asked me if I ride it or brake really hard and I told him about the other day...
I took a route home I've never taken before and the paved road went to dirt and gravel, the front end ended up hitting part of the road pretty hard. I'm guessing that's where those marks came from.
I'll let you all know how the bike performs and if I have any problems with it once I have the prototype fitted.
I met up with Scott at their shop in Huntington Beach, CA
He was a really nice guy.
He took the measurements and then we talked about the bike for quite a bit ha.
Now that they personally have taken the measurements, they will make a prototype which will take 2-3 weeks because they are also working on prototypes for two other bikes.
Once they are finished with it, they are going to call me back and fit it to the CB11, if it is a perfect fit, they will leave it on and let me ride with it until they have the final product ready.
The only options available will be Polished Aluminum or Anodized Black.
I'm thinking about going with the black.
The only problem he sees is the brace might hit the...two round thing-a-ma-jigs?? Those are for the horn right????
Because of the marks on my forks and explained I might have to move them up a bit.
The cables should be fine where they are at.
[url=http://imageshack.us/photo/my-images/826/photo8iu.jpg/]
He asked me if I ride it or brake really hard and I told him about the other day...
I took a route home I've never taken before and the paved road went to dirt and gravel, the front end ended up hitting part of the road pretty hard. I'm guessing that's where those marks came from.
I'll let you all know how the bike performs and if I have any problems with it once I have the prototype fitted.
Well it took them long enough!! I guess my measurements didn't do them any good
And now we have Superbrace and one of our members making them.
Oh, yeah, those round things are not the horns. You can prove this by putting your ear next to it and pushing the horn button
I am kidding ya know
Thanks for the update. Thumbs up smilie here!