+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: "Another" new mufler (/showthread.php?tid=10849)
Pages:
1
2
"Another" new mufler - gcarper_imp - 07-05-2013
I wasn't real pleased with the long muffler I installed on the CB, so started looking for a shorter one. Found one made by VooDoo, 17" long and could buy it from Amazon. Delivered today and I put it on. I'm a happy camper! Making a sound check video and will post it on youtube later.
http://youtu.be/IBtsr8Gm0HU
Here is the sound check video
RE: "Another" new mufler - furious_blue_imp - 07-05-2013
Nice. Is it this one ? 'cafe style reverse cone for 1.5" or 1.8" pipes' ?
https://estore.voodoomoto.com/ProductDetails.asp?ProductCode=VC404
RE: "Another" new mufler - Inline4_imp - 07-05-2013
WOW! That sounds impressive! Nice find!
RE: "Another" new mufler - Deanohh_imp - 07-05-2013
Please describe the installation.... Mid pipe, etc.
RE: "Another" new mufler - gcarper_imp - 07-05-2013
(07-05-2013, 10:26 AM)furious_blue_imp Wrote: Nice. Is it this one ? 'cafe style reverse cone for 1.5" or 1.8" pipes' ?
https://estore.voodoomoto.com/ProductDetails.asp?ProductCode=VC404
That's it-----------
RE: "Another" new mufler - furious_blue_imp - 07-06-2013
Looking at the pictures, it looks like this is not a straight bolt-on. An additional curved pipe is needed to connect the muffler to the stock head pipe (?).
RE: "Another" new mufler - SUPERCRUZ_imp - 07-06-2013
I have to say that muffler does sound good. The proportions are right for the bike as well. Nice find.
RE: "Another" new mufler - gcarper_imp - 07-06-2013
(07-05-2013, 10:52 AM)Deanohh_imp Wrote: Please describe the installation.... Mid pipe, etc.
The new muffler is not an exact fit and the link pipe must be made to curve from the under pipe to line up with the muffler. Any good muffler shop will be able to do this or if you have access to a pipe bender you can make your own. A local shop here in Gaffney made connecting links for my Vstrom and XR1200. I would have had him do the CB but I had a curved link from the Delkevic can I'd ordered for the XR so used it. I lucked out in that the Delkevic link pipe had a bracket that lined up with the center stand stop. My friend that owns the shop where I purchased the luggage rack and the long reverse cone had suggested welding a strap from the center stand to contact the link or muffler to be the center stand stop. Glue a strip of rubber on so it wouldn't clang.
(07-06-2013, 02:15 AM)furious_blue_imp Wrote: Looking at the pictures, it looks like this is not a straight bolt-on. An additional curved pipe is needed to connect the muffler to the stock head pipe (?).
See my reply to Deanohh.
RE: "Another" new mufler - gcarper_imp - 07-08-2013
I checked with Delkevic and the curved link pipe I used can be bought for $50 plus $8 for shipping. it's the link pipe for a 2009 Yamaha FZ1.
RE: "Another" new mufler - skeeter5070_imp - 07-14-2013
Where can you buy the curved link pipe ?
Is there a website for this product ? I could not find this item on the Delkevic website.