ID cafe racer seat - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: ID cafe racer seat (/showthread.php?tid=10606)

ID cafe racer seat - Riko_imp - 01-17-2014 Hi everybody, have been following this board for about a week now and am hoping to buy me one of these nice CB's one day. And I got to convert it into a cafe racer, over time Meanwhile I was hoping to rely on you guys' expertise...I wanted to know if anybody can ID this seat? Its a cafe racer style seat: thx a million! RE: ID cafe racer seat - CB4ME_imp - 01-18-2014 Not sure where I found this but the seat is similiar RE: ID cafe racer seat - Randy B - 01-18-2014 http://www.samurider.com/?p=6685/#itemImage RE: ID cafe racer seat - Riko_imp - 01-18-2014 Its not that seat. The plastic of my pic goes over the edge. On your seats the leather of the seat goes over the edge. RE: ID cafe racer seat - Randy B - 01-18-2014 It could be a custom seat. RE: ID cafe racer seat - Aussieflyer - 01-21-2014 Hi Riko, that is my bike and the seat is a custom unit hand crafted by a friend of mine here in Melbourne Australia. We took a little extra care and fabricated the unit to attach using the standard key lock system so it's very easy to put the dual seat back on the bike for passengers. You'll notice that unit covers the frame and has slots for the indicator stalks - this is to give it a more horizontal line like old school cafe racers. I removed the grab rails but otherwise the frame is untouched. Below is a pic of the bike to show rear end so you can see how the tail lamp was accommodated. Tail lamp is mounted to custom made fibreglass splash guard (moulded off the original chrome mudguard) so that changing seats does not impact the tail lamp operation. Hope that gives you some ideas on what can be done. I love the look of the bike's rear end and now to fabricate a smaller front mudguard and paint the side covers. RE: ID cafe racer seat - Riko_imp - 01-22-2014 wow, just georgeous man! are you going to share pics of the build and parts used? RE: ID cafe racer seat - Aussieflyer - 01-22-2014 Yes OK I will put up some pictures with descriptions in the next few days RE: ID cafe racer seat - Riko_imp - 01-23-2014 thx mate! I'm looking forward to it and I'm sure I'm not the only one. your mate perhaps sells these on order? RE: ID cafe racer seat - Aussieflyer - 01-25-2014 Hi guys - for anyone interested I am just letting you know that I have posted a few pics in the Media Centre / CB1100 Photos forum underthe title "Aussieflyer's Cafe Racer - part 1 through 5. http://cb1100forum.com/forum/showthread.php?tid=1970