Anybody found a front mud flap?

Anybody found a front mud flap? - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Anybody found a front mud flap? (/showthread.php?tid=10561)

Anybody found a front mud flap? - Romo1969_imp - 02-23-2014

A
Wondering if anybody found one that works well
B
Wondering if it looks good or like poopy.

Sent from my iPad using Tapatalk

RE: Anybody found a front mud flap? - Dakota_imp - 02-23-2014

I haven't used it but there is the Fenda Extenda:

http://shop.fendaextenda.com/product.sc?productId=147

RE: Anybody found a front mud flap? - Mick65_imp - 02-23-2014

Had a look at that one, I think it's a stick/glue on job. Cb std fender is way to short.

RE: Anybody found a front mud flap? - CB4ME_imp - 02-23-2014

They work ok but are not a cure all, especially on dirt roads. I had the Fenda Extender on my stock fender and still got plenty of mud on the lower front of the engine and headers. But you do get less dirt and rock hits with them than without. Cheap protection.

RE: Anybody found a front mud flap? - the Ferret - 02-23-2014

(02-23-2014, 02:33 AM)Dakota_imp Wrote: I haven't used it but there is the Fenda Extenda:

http://shop.fendaextenda.com/product.sc?productId=147

Looks like a nice product, how do you affix it to fender?

Ok found this using search..thought I'd remember a couple putting them on

http://cb1100forum.com/forum/showthread.php?tid=888&page=2&highlight=Fenda+extenda

So, Popgun and CB4ME.. Has the glue you used held up? Do you think it has done a good job? Would you buy another?

RE: Anybody found a front mud flap? - CB4ME_imp - 02-23-2014

(02-23-2014, 05:56 AM)The ferret_imp Wrote:
(02-23-2014, 02:33 AM)Dakota_imp Wrote: I haven't used it but there is the Fenda Extenda:

http://shop.fendaextenda.com/product.sc?productId=147

Looks like a nice product, how do you affix it to fender?

Ok found this using search..thought I'd remember a couple putting them on

http://cb1100forum.com/forum/showthread.php?tid=888&page=2&highlight=Fenda+extenda

So, Popgun and CB4ME.. Has the glue you used held up? Do you think it has done a good job? Would you buy another?

I scruffed the fender and plastic, then used a good epoxy. I would be hard pressed to take mine off if I wanted to. It seems permanantly bonded.

The extrender works fine but it's not fool proof. One of these should work even better (if you want to spend 10x as much):

[Image: 37521c40bf890059cf94a7ef07bbc208.jpg]

[Image: 37521c40bf890059cf94a7ef07bbc208.jpg]

RE: Anybody found a front mud flap? - the Ferret - 02-23-2014

(02-23-2014, 10:02 AM)CB4ME_imp Wrote:
The ferret_imp pid="0" dateline=" Wrote:

I scruffed the fender and plastic, then used a good epoxy. I would be hard pressed to take mine off if I wanted to. It seems permanantly bonded.

The extrender works fine but it's not fool proof. One of these should work even better (if you want to spend 10x as much):

[Image: ac8d1fd2bf08bb1581b1851cdf982c78.jpg]

Lol... i think you know Im sort of a tight wad. I dont really want to spend $30 plus spring for epoxy, but it might make a pretty nice addition. Have to ponder ...

RE: Anybody found a front mud flap? - Lord Popgun - 02-23-2014

Like CB4ME I scuffed up the mating surface and bonded it on with a marine adhesive. I used 3M 5200. I may have used the fast cure as regular 5200 takes a week to set up, but I can't remember now.

I'm happy with mine, and have had the same experiance that CB had with less rock hits, but still get some splatter.

It is never going to be as good as that long fender.

RE: Anybody found a front mud flap? - Ack-CB11_imp - 02-23-2014

Long fender, chrome

http://cb1100forum.com/forum/showthread.php?tid=1181&pid=28079#pid28079