+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Dime City Cycles "Wasp" fairing (/showthread.php?tid=10453)
Dime City Cycles "Wasp" fairing - flat_four_imp - 03-31-2014
I haven't seen anyone with this fairing yet, so I thought I would post mine:
![[Image: c2f315dfe793eaa0b72f0776ed1819a9.jpg]](https://cb1100forum.net/forum/uploads/imp/201403/c2f315dfe793eaa0b72f0776ed1819a9.jpg)
![[Image: f953034647ff328a59e3518e599cabd7.jpg]](https://cb1100forum.net/forum/uploads/imp/201403/f953034647ff328a59e3518e599cabd7.jpg)
It took some trimming, but I think it turned out well.
Dime City Cycles "Wasp" fairing - Cormanus - 03-31-2014
Looks good, mate.
RE: Dime City Cycles "Wasp" fairing - the Ferret - 03-31-2014
Cool.... Describe " some trimming"
RE: Dime City Cycles "Wasp" fairing - The Spaceman_imp - 03-31-2014
Does "Wasp" refer to the fairing or the rider?
Just kidding guys...
RE: Dime City Cycles "Wasp" fairing - flat_four_imp - 04-01-2014
I will have to get some pictures of it, but the fairing has a dash of sorts; I had to trim it for a closer fit. I also had to trim up around the signals. It was about an hour fitting and trimming because I wanted to fit tight around the gauges
RE: Dime City Cycles "Wasp" fairing - silascopathic_imp - 04-12-2014
(04-01-2014, 10:36 AM)flat_four_imp Wrote: I will have to get some pictures of it, but the fairing has a dash of sorts; I had to trim it for a closer fit. I also had to trim up around the signals. It was about an hour fitting and trimming because I wanted to fit tight around the gauges
Yo man ! Let's meet up and ride sometime!! Nice to see another person here form Austin!