+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: THATS A NICE RACK! (/showthread.php?tid=10076)
Pages:
1
2
THATS A NICE RACK! - scott will_imp - 09-18-2013
[attachment=467][attachment=468]finally my luggage/bar rack is in from italy. its a givi sr1118 . i looked at several and liked this one best.
easy install, aprox time 1 beer . bolts right up to exsisting tie down bolts that extend on sides, did have to unbolt the top part of fender to get to rear nuts. not bad tho . becareful tightening the fender bolts the very far back 10mm are pot metal and didnt hold up the torque spec(RFT)
i shouldve pulled her out of garage for pics , was in a hurry to get done still 108 degrees yesterday and i was soaked
RE: THATS A NICE RACK! - the Ferret - 09-18-2013
Oh my.... That IS a nice looking rack!
RE: THATS A NICE RACK! - ron1100_imp - 09-18-2013
I really like the look of this one. Nice and almost half the price of OEM.
RE: THATS A NICE RACK! - Smiler_imp - 09-18-2013
Have to agree, very nice rack
RE: THATS A NICE RACK! - Tripod_imp - 09-18-2013
All but one of the pictures are blurry. Can't seem to see anything in any of the pics except the one with the comfortable looking back rest...
RE: THATS A NICE RACK! - silascopathic_imp - 09-18-2013
Great rack. One of a kind. lucky man
RE: THATS A NICE RACK! - ron1100_imp - 09-18-2013
This is what I had in mind and at a decent price. I just ordered one. Thanks for sharing.
RE: THATS A NICE RACK! - FUZZY_imp - 09-18-2013
VERY symmetrical ........
RE: THATS A NICE RACK! - Capo - 09-18-2013
Indeed. And that's also a nice luggage carrier you added to the CB.
RE: THATS A NICE RACK! - cbtime_imp - 10-11-2014
Does your passenger find that the part extended above the seat helps in feeling secure?
(09-18-2013, 12:42 AM)scott will_imp Wrote: [attachment=467][attachment=468]finally my luggage/bar rack is in from italy. its a givi sr1118 . i looked at several and liked this one best.
easy install, aprox time 1 beer . bolts right up to exsisting tie down bolts that extend on sides, did have to unbolt the top part of fender to get to rear nuts. not bad tho . becareful tightening the fender bolts the very far back 10mm are pot metal and didnt hold up the torque spec(RFT)
i shouldve pulled her out of garage for pics , was in a hurry to get done still 108 degrees yesterday and i was soaked