+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: New silver renthal bars and bar end mirrors (/showthread.php?tid=10023)
Pages:
1
2
New silver renthal bars and bar end mirrors - silascopathic_imp - 07-09-2013
Hey guys! So I installed new bars today and bar end mirrors. Silver tiniest rise available renthal bars.
![[Image: 0058f924a1e69b286d0296935a5add7c.jpg]](https://cb1100forum.net/forum/uploads/imp/201307/0058f924a1e69b286d0296935a5add7c.jpg)
![[Image: ca7a023b747d20b4c365a30a7cc62ca3.jpg]](https://cb1100forum.net/forum/uploads/imp/201307/ca7a023b747d20b4c365a30a7cc62ca3.jpg)
![[Image: bcfeac6fb2b015dc53da2c1e010cad41.jpg]](https://cb1100forum.net/forum/uploads/imp/201307/bcfeac6fb2b015dc53da2c1e010cad41.jpg)
Next up should be the aluminum cowling !
RE: New silver renthal bars and bar end mirrors - Scoobynut_imp - 07-09-2013
Looks great! How comfortable is the bend/reach etc.?
RE: New silver renthal bars and bar end mirrors - silascopathic_imp - 07-09-2013
(07-09-2013, 02:51 PM)Scoobynut_imp Wrote: Looks great! How comfortable is the bend/reach etc.?
So comfortable. It's a totally different bike in a good way and now with those mickey mouse mirrors gone I have a clear view
RE: New silver renthal bars and bar end mirrors - ChipBeck_imp - 07-10-2013
Silas,
I've got a couple questions.
1. What is the width of those bars compared to the stock bar? (Not counting the mirrors or bar end weights)
2. Did you have any trouble with your bar controls hitting the gas tank at full lock?
3. Hollow aluminum or solid?
4. Did you have to shim the bars or bar controls to get everything tight when you installed them?
5. Bar vibration the same, better, or worse than stock?
6. (Last one I promise) Your source, model #, and price?
Thanks bro!
Chip
RE: New silver renthal bars and bar end mirrors - silascopathic_imp - 07-10-2013
Chip,
1. What is the width of those bars compared to the stock bar? (Not counting the mirrors or bar end weights)
725 mm
2. Did you have any trouble with your bar controls hitting the gas tank at full lock?
Nope! none at all
3. Hollow aluminum or solid?
hollow but they have a thick wall, 14mm internal diameter
4. Did you have to shim the bars or bar controls to get everything tight when you installed them?
no shimming needed. just had to drill the holes for the controls to lock into. (measure and test prior to drilling)
5. Bar vibration the same, better, or worse than stock?
Vibration is a bit better to be honest. My stance has changed so I put more weight on my hands (because I'm leaning forward more, which I love)
6. (Last one I promise) Your source, model #, and price?
They are Renthal Road Ultra Low Bars. I paid $52 for them. They come in satin aluminum (what I have), satin gold ( another member on here has them) and black ( not sure if they are satin on gloss)
Part # 758-01
I got them from Amazon.com Search for Renthal Ultra Low Road Bars
RE: New silver renthal bars and bar end mirrors - mustakoira_imp - 07-11-2013
(07-09-2013, 01:59 PM)silascopathic_imp Wrote: Hey guys! So I installed new bars today and bar end mirrors. Silver tiniest rise available renthal bars.
Next up should be the aluminum cowling !
I really like what you have done. What mirrors are those and where did you buy them?
Thanks.
RE: New silver renthal bars and bar end mirrors - silascopathic_imp - 07-12-2013
thank you! those mirrors i found on ebay. Just search for bar end mirrors. You will eventually find these. they come in chrome too. Due to the internal diameter of the renthal bars i had to alter the mechanism that allows the mirrors to fit inside the bars. The mirrors come with a screw and a flexible plastic washer thing that as you tighten the mount inside the bars the mount actually stays in place. The plastic washer doesn't fit inside. I has to replace it with a piece of rubber hose. It did the trick and those mirrors work wonderfully!
RE: New silver renthal bars and bar end mirrors - jodyz_imp - 07-15-2013
(07-09-2013, 01:59 PM)silascopathic_imp Wrote: Hey guys! So I installed new bars today and bar end mirrors. Silver tiniest rise available renthal bars.
Next up should be the aluminum cowling !
Did you try flipping the risers around to move the bars forward slightly? I've heard it can be done, but haven't seen/tried it yet. Probably wouldn't work for me anyway because I'm short, but i've considered it.
RE: New silver renthal bars and bar end mirrors - silascopathic_imp - 07-15-2013
(07-15-2013, 10:36 AM)jodyz_imp Wrote:(07-09-2013, 01:59 PM)silascopathic_imp Wrote: Hey guys! So I installed new bars today and bar end mirrors. Silver tiniest rise available renthal bars.
Next up should be the aluminum cowling !
Did you try flipping the risers around to move the bars forward slightly? I've heard it can be done, but haven't seen/tried it yet. Probably wouldn't work for me anyway because I'm short, but i've considered it.
Did you try flipping the risers around to move the bars forward slightly? I've heard it can be done, but haven't seen/tried it yet. Probably wouldn't work for me anyway because I'm short, but i've considered it.
i havent but that is an interesting thought! perhaps i'll give it a shot!
RE: New silver renthal bars and bar end mirrors - CBMike_imp - 07-17-2013
With these are you at the limit of clearance at full lock? Just wondering if flat bars are possible on the CB.