The CB1100 Community Forum
Where to tap speed sensor signal? - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Where to tap speed sensor signal? (/showthread.php?tid=8683)

Pages: 1 2 3 4 5 6 7 8 9 10

RE: Where to tap speed sensor signal? - Lord Popgun - 07-24-2018

Hey! Bakelite was cool Smile

RE: Where to tap speed sensor signal? - Cormanus - 07-24-2018

Waddaya mean "Bakelite WAS cool?

RE: Where to tap speed sensor signal? - peterbaron - 07-24-2018

YES, agree to both statements...remember those days very well...and these were solid built as well Wink

RE: Where to tap speed sensor signal? - peterbaron - 07-25-2018

REQUEST TWO perfect pictures of 2014 US model NONE ABS rear Wheel Speed Sensor....there are two types, pulse type generator or hall effect...not so sure which US model has....possible pic will tell, unless someone knows Huh for 100%...need fast answer, going on short vacation, please

Where to tap speed sensor signal? - PowerDubs_imp - 07-25-2018

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F372164075383


https://m.ebay.com/itm/2014-Honda-CB1100-E-CB1100E-Rear-ABS-Wheel-Speed-Sensor-38510-MGC-003/263508174775




Sent from my iPhone using Tapatalk

RE: Where to tap speed sensor signal? - peterbaron - 07-25-2018

(07-25-2018, 12:58 PM)PowerDubs_imp Wrote: https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F372164075383


https://m.ebay.com/itm/2014-Honda-CB1100-E-CB1100E-Rear-ABS-Wheel-Speed-Sensor-38510-MGC-003/263508174775




Sent from my iPhone using Tapatalk

Is that the same one, you have mounted on your rear wheel (NO ABS) ??...can I also have a good pic of yours as is bolted (rear WSS, no need to take it apart, just good pic from close range), please . Thanks

Where to tap speed sensor signal? - PowerDubs_imp - 07-25-2018

As far as I know they are all the same.

Here is mine on the bike-

[Image: e2af6d756f11e5811a53048e4e4ce3e4.jpg]

[Image: 47cc915e89ffdbd0e9e2168004985cbe.jpg]


Sent from my iPhone using Tapatalk

RE: Where to tap speed sensor signal? - peterbaron - 08-14-2018

UPDATE ONLY,
Still working on this case, will try to submit more info before my vacation, starting Saturday Aug.18.
Some info already in my possession, still needs evaluation.

Where to tap speed sensor signal? - chync_imp - 08-14-2018

(07-25-2018, 11:34 AM)peterbaron_imp Wrote: REQUEST TWO perfect pictures of 2014 US model NONE ABS rear Wheel Speed Sensor....there are two types, pulse type generator or hall effect...not so sure which US model has....possible pic will tell, unless someone knows Huh for 100%...need fast answer, going on short vacation, please


The US model for 2014 non abs is different than European and/or previous year models. I discovered this when installing a speedohealer from healtech electronics which allows you to recalibrate the speedometer. The 2014 US model sends out a high/low signal which I guess is the pulse type. Healtech didn’t even realize the change or difference when I couldn’t get their product to work which was advertised to work on my year model. If the electronics being installed expect a different type of signal obviously it won’t work. I tapped my speed sensor wire at the connector plug behind the right side panel near the air intake.

Apologies if this info is redundant or has already been shared. This has to be one of the longest threads for such a specific issue.


Sent from my iPhone using Tapatalk

RE: Where to tap speed sensor signal? - Lord Popgun - 08-14-2018

Peter, I couldn’t a scope probe on a pin easily so I ordered a cheap o-scope current probe. It hasn’t come yet.

And yes, I could have pierced a wire, but not happining.

Man, a good scope current probe is EXPENSIVE! I hope a cheap China one works for this application.