+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Yoshimura Full System (/showthread.php?tid=10377)
RE: Yoshimura Full System - silascopathic_imp - 08-20-2013
(08-19-2013, 11:05 PM)FUZZY_imp Wrote:(08-19-2013, 10:50 PM)silascopathic_imp Wrote: fuzz,
do you reccomend doing the airbox mod without the power commander? I feel like it would improve things for me a bit.
also what the hell is that thing a strainer?!
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws. When you decide to get a PCV let me know & I'll tell you what I did to my air box.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws.
(08-19-2013, 11:05 PM)FUZZY_imp Wrote:(08-19-2013, 10:50 PM)silascopathic_imp Wrote: fuzz,
do you reccomend doing the airbox mod without the power commander? I feel like it would improve things for me a bit.
also what the hell is that thing a strainer?!
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws. When you decide to get a PCV let me know & I'll tell you what I did to my air box.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws. When you decide to get a PCV let me know & I'll tell you what I did to my air box.
most likely next month for sure. do you notice more mid range power between 2.5K and 4.5K?
RE: Yoshimura Full System - FUZZY_imp - 08-20-2013
(08-20-2013, 01:42 AM)silascopathic_imp Wrote:(08-19-2013, 11:05 PM)FUZZY_imp Wrote:(08-19-2013, 10:50 PM)silascopathic_imp Wrote: fuzz,
do you reccomend doing the airbox mod without the power commander? I feel like it would improve things for me a bit.
also what the hell is that thing a strainer?!
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws. When you decide to get a PCV let me know & I'll tell you what I did to my air box.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws.
(08-19-2013, 11:05 PM)FUZZY_imp Wrote:(08-19-2013, 10:50 PM)silascopathic_imp Wrote: fuzz,
do you reccomend doing the airbox mod without the power commander? I feel like it would improve things for me a bit.
also what the hell is that thing a strainer?!
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws. When you decide to get a PCV let me know & I'll tell you what I did to my air box.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws. When you decide to get a PCV let me know & I'll tell you what I did to my air box.
most likely next month for sure. do you notice more mid range power between 2.5K and 4.5K?
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws.
(08-19-2013, 11:05 PM)FUZZY_imp Wrote:(08-19-2013, 10:50 PM)silascopathic_imp Wrote: fuzz,
do you reccomend doing the airbox mod without the power commander? I feel like it would improve things for me a bit.
also what the hell is that thing a strainer?!
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws. When you decide to get a PCV let me know & I'll tell you what I did to my air box.
No I do not recommend without PC. It will cause a lean condition.
It is a strainer. I'm going to see if it gets a bunch of bugs n crap on it. If not it's gone. Just 2 screws. When you decide to get a PCV let me know & I'll tell you what I did to my air box.
most likely next month for sure. do you notice more mid range power between 2.5K and 4.5K? Yes sir. Needs some more gas to get true gains though. It will lift from 1st gear romp & float momentarily. Maybe 4-6" high.
RE: Yoshimura Full System - silascopathic_imp - 08-20-2013
nice! would you say its totally worth it man?
RE: Yoshimura Full System - FUZZY_imp - 08-20-2013
(08-20-2013, 02:36 AM)silascopathic_imp Wrote: nice! would you say its totally worth it man?
NO Doubt!
RE: Yoshimura Full System - silascopathic_imp - 08-20-2013
niceeeee. yea i'm gonna have to get this done ASAP!
RE: Yoshimura Full System - lccb1100a_imp - 09-12-2013
(08-08-2013, 08:59 AM)FUZZY_imp Wrote:Depends on dealer & how much time it takes to dial it in. Usually a couple hundred bucks. Checking w/Honda of Houston.(08-08-2013, 08:56 AM)The ferret_imp Wrote: How much is a dyno run out of curiosity?Depends on dealer & how much time it takes to dial it in. Usually a couple hundred bucks. Checking w/Honda of Houston.
FYI, the place I go to in Sterling, VA charges $50 for a dyno test. It's the Power Commander, and modifying the map that cost a lot of money. The dyno is very inexpensive, at least at my shop.
RE: Yoshimura Full System - FUZZY_imp - 09-13-2013
(09-12-2013, 11:12 PM)lccb1100a_imp Wrote:Depends on dealer & how much time it takes to dial it in. Usually a couple hundred bucks. Checking w/Honda of Houston.(08-08-2013, 08:59 AM)FUZZY_imp Wrote:Depends on dealer & how much time it takes to dial it in. Usually a couple hundred bucks. Checking w/Honda of Houston.(08-08-2013, 08:56 AM)The ferret_imp Wrote: How much is a dyno run out of curiosity?Depends on dealer & how much time it takes to dial it in. Usually a couple hundred bucks. Checking w/Honda of Houston.
FYI, the place I go to in Sterling, VA charges $50 for a dyno test. It's the Power Commander, and modifying the map that cost a lot of money. The dyno is very inexpensive, at least at my shop.
FYI, the place I go to in Sterling, VA charges $50 for a dyno test. It's the Power Commander, and modifying the map that cost a lot of money. The dyno is very inexpensive, at least at my shop.
Took a little over 2 hours due to no base map available. Cost $200. Quoted same @ other local shops as well. Maybe 50 for a single pull. Still kinda light.
RE: Yoshimura Full System - Deftquiver_imp - 09-13-2013
I'd love to see those dyno results...
RE: Yoshimura Full System - GUNFTR_imp - 09-13-2013
(09-13-2013, 04:36 AM)FUZZY_imp Wrote:Depends on dealer & how much time it takes to dial it in. Usually a couple hundred bucks. Checking w/Honda of Houston.(09-12-2013, 11:12 PM)lccb1100a_imp Wrote:Depends on dealer & how much time it takes to dial it in. Usually a couple hundred bucks. Checking w/Honda of Houston.(08-08-2013, 08:59 AM)FUZZY_imp Wrote:Depends on dealer & how much time it takes to dial it in. Usually a couple hundred bucks. Checking w/Honda of Houston.(08-08-2013, 08:56 AM)The ferret_imp Wrote: How much is a dyno run out of curiosity?Depends on dealer & how much time it takes to dial it in. Usually a couple hundred bucks. Checking w/Honda of Houston.
FYI, the place I go to in Sterling, VA charges $50 for a dyno test. It's the Power Commander, and modifying the map that cost a lot of money. The dyno is very inexpensive, at least at my shop.
FYI, the place I go to in Sterling, VA charges $50 for a dyno test. It's the Power Commander, and modifying the map that cost a lot of money. The dyno is very inexpensive, at least at my shop.
Took a little over 2 hours due to no base map available. Cost $200. Quoted same @ other local shops as well. Maybe 50 for a single pull. Still kinda light.
FYI, the place I go to in Sterling, VA charges $50 for a dyno test. It's the Power Commander, and modifying the map that cost a lot of money. The dyno is very inexpensive, at least at my shop.
Took a little over 2 hours due to no base map available. Cost $200. Quoted same @ other local shops as well. Maybe 50 for a single pull. Still kinda light.
By comparison, I have paid close to $200 each time (plus the cost of the jet kit) to the Honda dealership to perform a rejet (due to intake and exhaust mods) for most of the Honda V-twins I've owned in the past. So $200 to dyno and re-map a bike seems perfectly reasonable to me.
RE: Yoshimura Full System - Deftquiver_imp - 09-13-2013
Are you talking about a carbureted bike dyno tune? I would think that would be much more involved than FI tuning... Carb tuning is wizardry in my opinion.