(03-11-2015, 01:17 AM)DGShannon_imp Wrote: Old thread, and the idea that you might be able to change the oil & filter without removing the header was left hanging. Anyone prove it one way or the other?

(12-01-2017, 02:33 AM)okredneck_imp Wrote: I received my K factory pipes and they will not mount up to the exhaust ports I can get 3 of the 4 matched up but not all 4

(12-01-2017, 10:49 PM)Gumby 1100_imp Wrote:

(12-01-2017, 02:33 AM)okredneck_imp Wrote: I received my K factory pipes and they will not mount up to the exhaust ports I can get 3 of the 4 matched up but not all 4

OK,

Is one of the pipes physically not reaching or not centered over the exhaust port?
If that is the case, perhaps your header got damaged (bent) in transit.

Did you try rotating one or more of the flange plates. They are not symmetrical and each one must be oriented correctly to fit and for the studs to align.

(08-06-2013, 09:43 PM)silascopathic_imp Wrote: Ok so here are some pictures of the exhaust almost fully installed. Getting the O2 sensor out of the factory exhaust is gonna be a cuss. its in there pretty tight and i do not have a lot of wiggle room.

I also upgraded the baffle as you can see from the pictures. I could just remove it but i'm not looking for a super loud sound. although when i do videos of the bike with the pipe i will include a video of the exhaust sans baffle.

anyway. here are some pictures. they are crappy but its better than no pictures!

[url=http://s561.photobucket.com/user/SIGFREAK239/media/8FB08FFD-8046-4DD6-A763-2FC3A617F69A-16936-000001D3CF60EC6F.jpg.html]
[url=http://s561.photobucket.com/user/SIGFREAK239/media/9A18983C-2AE4-4A3E-9C63-C7323583BD2D-16936-000001D3C9E617D9.jpg.html]
[url=http://s561.photobucket.com/user/SIGFREAK239/media/70EDBC2D-D28C-4616-8501-32D5C686DA5F-16936-000001D3BCF4DC57.jpg.html]
[url=http://s561.photobucket.com/user/SIGFREAK239/media/2679903D-D196-4CF6-8E80-5F34C42BD75C-16936-000001D3D481E4EA.jpg.html]