The CB1100 Community Forum
Spark Plugs - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Spark Plugs (/showthread.php?tid=4426)

Pages: 1 2 3 4 5 6 7 8 9 10 11

RE: Spark Plugs - GoldOxide_imp - 12-16-2020

Solid tip [url=http://cb1100forum.com/forum/member.php?action=profile&uid=3454]PB. Thumbs Up

Spark Plugs - tod.branko_imp - 12-16-2020

Yup, thanks, all done, I removed the tank for sake of it, as it turns out I even had a special tool [Image: 8cf6fe798eb7be7eb00c341ea64a99eb.png]

Anyhow, thank you for the tip, I actually only disconnected the quick connector and turned the tank around counterclockwise on the seat.

Air element was a hassle, stuff that is under my right side cover looks nothing like the workshop manual picture. Off to put in fork gaters. That's for a different thread tho[Image: 7c163879a744afa8b7793b4bfa247f80.jpg][Image: 2f3e37a2cf8d96edd4341f31d1b0110b.jpg][Image: b2c445d66562217bc97184f7c456ebc9.jpg][Image: bd33dd11d2938e441a772541a6cee685.jpg][Image: 191fb6ff4cb31ded45c35766aab8cdf2.jpg]

'14 CB1100 STD 5 speed

RE: Spark Plugs - LakeWylieJoe_imp - 12-17-2020

I think the plugs are costly because of the low production quantities involved. Is the CB1100 the only bike these work in? Could be. The long threads to accommodate the oil passages give them a unique form factor, for sure.

I bought the rest of the OEM tool kit from Honda and the spark plug wrench is a good one with a 10mm hex extension on top that will take a box end or socket wrench.



RE: Spark Plugs - tod.branko_imp - 12-17-2020

(12-17-2020, 01:42 AM)LakeWylieJoe_imp Wrote: I think the plugs are costly because of the low production quantities involved. Is the CB1100 the only bike these work in? Could be. The long threads to accommodate the oil passages give them a unique form factor, for sure.

I bought the rest of the OEM tool kit from Honda and the spark plug wrench is a good one with a 10mm hex extension on top that will take a box end or socket wrench.
Well considering that I found them for 6$ a pop, they are not that expensive. But yes, they are only made for this bike and no other

'14 CB1100 STD 5 speed

RE: Spark Plugs - GoldOxide_imp - 12-17-2020

Great show pics Tod. Forum gets a clearer idea of what's under the skirt.

RE: Spark Plugs - tod.branko_imp - 12-17-2020

(12-17-2020, 09:13 AM)GoldOxide_imp Wrote: Great show pics Tod. Forum gets a clearer idea of what's under the skirt.
"Under the pants" sir, my CB is a steed. All my bikes were/are male, it's a bro-love, never romantic lol

'14 CB1100 STD 5 speed

RE: Bujías - Alfgaxatico_imp - 12-17-2020

My friend ; how many time/kilómeters was from the last change ????

RE: Bujías - tod.branko_imp - 12-17-2020

(12-17-2020, 02:06 PM)Alfgaxatico_imp Wrote: My friend ; how many time/kilómeters was from the last change ????
I don't think the plugs were ever changed. They are not bad, just rusty as the bike has been sitting for a while, outdoors I suspect. Current ODO is around 13000km

'14 CB1100 STD 5 speed

RE: Spark Plugs - Houtman_imp - 12-17-2020

If you change your spark plugs make certain that you use high pressure air to blow away any dirt around the plug. After loosing them a few turns use air pressure again as sometimes a little dirt/sand/grit was lodged under neat the plug.

Spark Plugs - tod.branko_imp - 12-17-2020

Yes I blew in and around the holes, hope that's enough pressure because it's all it's going to get, I don't have and don't plan on getting a compressor any time soon. Work with what you've got is tbe name of the game [Image: f0ccd1e13cb3aff03ba1f8444b42ffad.png]

'14 CB1100 STD 5 speed