The CB1100 Community Forum
 My prescription for the stock License plate bracket - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6)
+--- Thread:  My prescription for the stock License plate bracket (/showthread.php?tid=2083)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14

RE: My prescription for the stock License plate bracket - Jack1979_imp - 04-30-2015

(03-28-2015, 07:15 AM)metalmaven_imp Wrote: Hi guys, I mentioned that I will be making a few things for my 2014 CB110 and I finally got my first piece! Its a plate to replace the stock reflector bracket, I mean license plate bracket ;-)

I actually made two of these, and as some of you may know I have been doing custom metalwork since 1996. So here is a link to my Etsy Store where I have one for sale. Please check it out.

I plan on making more if the demand is out there.

[url=https://www.etsy.com/listing/227900177/honda-cb1100-license-plate-bracket?ref=sr_gallery_1&ga_search_query=cb1100&ga_search_type=all&ga_view_type=gallery]Etsy Link
Funny I see this tonight. I just ordered one of these from you last night and didn't even know you were on the forum
(03-28-2015, 07:15 AM)metalmaven_imp Wrote: Hi guys, I mentioned that I will be making a few things for my 2014 CB110 and I finally got my first piece! Its a plate to replace the stock reflector bracket, I mean license plate bracket ;-)

I actually made two of these, and as some of you may know I have been doing custom metalwork since 1996. So here is a link to my Etsy Store where I have one for sale. Please check it out.

I plan on making more if the demand is out there.

[url=https://www.etsy.com/listing/227900177/honda-cb1100-license-plate-bracket?ref=sr_gallery_1&ga_search_query=cb1100&ga_search_type=all&ga_view_type=gallery]Etsy Link
I stumbled upon your bracket last night on google and ordered it. I had no clue you were on the forum

RE: My prescription for the stock License plate bracket - metalmaven_imp - 04-30-2015

That's awesome! Didn't know I was google-able. Shipping tomorrow!

RE: My prescription for the stock License plate bracket - Jack1979_imp - 04-30-2015

(04-30-2015, 10:33 AM)metalmaven_imp Wrote: That's awesome! Didn't know I was google-able. Shipping tomorrow!

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
Plate not blare

RE: My prescription for the stock License plate bracket - metalmaven_imp - 04-30-2015

(04-30-2015, 10:36 AM)Jack1979_imp Wrote:
(04-30-2015, 10:33 AM)metalmaven_imp Wrote: That's awesome! Didn't know I was google-able. Shipping tomorrow!

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
Plate not blare

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
(04-30-2015, 10:36 AM)Jack1979_imp Wrote:
(04-30-2015, 10:33 AM)metalmaven_imp Wrote: That's awesome! Didn't know I was google-able. Shipping tomorrow!

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
Plate not blare

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
Plate not blare
yes the plate will de-amish the rear end for sure! lol

RE: My prescription for the stock License plate bracket - Jack1979_imp - 05-04-2015

(04-30-2015, 09:28 PM)metalmaven_imp Wrote:
(04-30-2015, 10:36 AM)Jack1979_imp Wrote:
(04-30-2015, 10:33 AM)metalmaven_imp Wrote: That's awesome! Didn't know I was google-able. Shipping tomorrow!

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
Plate not blare

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
(04-30-2015, 10:36 AM)Jack1979_imp Wrote:
(04-30-2015, 10:33 AM)metalmaven_imp Wrote: That's awesome! Didn't know I was google-able. Shipping tomorrow!

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
Plate not blare

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
Plate not blare
yes the plate will de-amish the rear end for sure! lol

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
(04-30-2015, 10:36 AM)Jack1979_imp Wrote:
(04-30-2015, 10:33 AM)metalmaven_imp Wrote: That's awesome! Didn't know I was google-able. Shipping tomorrow!

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
Plate not blare

Thanks, I'm excited to get it and drop the reflectors. It makes the back of the bike look like an Amis buggy with all of them on there. I googled cb1100 licenses blare bracket and it showed up on the images
Plate not blare
yes the plate will de-amish the rear end for sure! lol
Got the bracket installed literally a minute ago. Back end looks so much better thanks a lot Clap

RE: My prescription for the stock License plate bracket - emptysea - 05-04-2015

OK So, I had already fabricated the aluminum plate, per ChipBeck's original plan, but I could not find the right mounting bolts and nuts. Any chance that I could purchase just the nuts, bolts, and washers you, metalmaven? As it stands, my plate is slightly bent due to the round headed bolts and the plastic frame bolts look like garbage. Let me know.

RE: My prescription for the stock License plate bracket - metalmaven_imp - 05-04-2015

(05-04-2015, 06:19 AM)EmptySea_imp Wrote: OK So, I had already fabricated the aluminum plate, per ChipBeck's original plan, but I could not find the right mounting bolts and nuts. Any chance that I could purchase just the nuts, bolts, and washers you, metalmaven? As it stands, my plate is slightly bent due to the round headed bolts and the plastic frame bolts look like garbage. Let me know.

Are you talking about the 2 bolts that mount the plate to the fender?

My prescription for the stock License plate bracket - Capo - 05-04-2015

Ordered!

RE: My prescription for the stock License plate bracket - emptysea - 05-04-2015

(05-04-2015, 06:24 AM)metalmaven_imp Wrote:
(05-04-2015, 06:19 AM)EmptySea_imp Wrote: OK So, I had already fabricated the aluminum plate, per ChipBeck's original plan, but I could not find the right mounting bolts and nuts. Any chance that I could purchase just the nuts, bolts, and washers you, metalmaven? As it stands, my plate is slightly bent due to the round headed bolts and the plastic frame bolts look like garbage. Let me know.

Are you talking about the 2 bolts that mount the plate to the fender?

Are you talking about the 2 bolts that mount the plate to the fender?
Yes, and the bolts for mounting the frame to the license plate.

RE: My prescription for the stock License plate bracket - metalmaven_imp - 05-04-2015

(05-04-2015, 06:49 AM)EmptySea_imp Wrote:
(05-04-2015, 06:24 AM)metalmaven_imp Wrote:
(05-04-2015, 06:19 AM)EmptySea_imp Wrote: OK So, I had already fabricated the aluminum plate, per ChipBeck's original plan, but I could not find the right mounting bolts and nuts. Any chance that I could purchase just the nuts, bolts, and washers you, metalmaven? As it stands, my plate is slightly bent due to the round headed bolts and the plastic frame bolts look like garbage. Let me know.

Are you talking about the 2 bolts that mount the plate to the fender?

Are you talking about the 2 bolts that mount the plate to the fender?
Yes, and the bolts for mounting the frame to the license plate.

Are you talking about the 2 bolts that mount the plate to the fender?
Yes, and the bolts for mounting the frame to the license plate.
Ok so the 2 bolts that mount the plate to the fender use the existing locknuts and washers that came stock. I can send you the 2 countersunk screws.
I can also send you the plate screws, washers and acorn nuts. Did you only need 2 sets of screws, washers and acorn nuts for the plate itself? I usually send out 4 with my bracket because it covers the whole backside of the license plate and uses 4 screws..