The CB1100 Community Forum
Stock Exhaust Mod - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Stock Exhaust Mod (/showthread.php?tid=7870)

Pages: 1 2 3 4 5 6 7 8

RE: Stock Exhaust Mod - TCinNC_imp - 06-21-2016

(06-21-2016, 12:03 AM)Inhouse Bob_imp Wrote: It's been asked before by others and ignored, but I'll ask again... do you get any popping on deceleration with this mod? I know that the air injecting PAIR valve thingie can be easily disabled and that's great, but I would rather not do that if it isn't necessary.
So. Popping. Yes or no.
Thanks!

I drilled 6 3/8 in holes and reinstalled the end cap. I have NO decel popping at all.

RE: Stock Exhaust Mod - Inhouse Bob - 06-21-2016

(06-21-2016, 07:12 AM)TCinNC_imp Wrote:
(06-21-2016, 12:03 AM)Inhouse Bob_imp Wrote: It's been asked before by others and ignored, but I'll ask again... do you get any popping on deceleration with this mod? I know that the air injecting PAIR valve thingie can be easily disabled and that's great, but I would rather not do that if it isn't necessary.
So. Popping. Yes or no.
Thanks!

I drilled 6 3/8 in holes and reinstalled the end cap. I have NO decel popping at all.

I drilled 6 3/8 in holes and reinstalled the end cap. I have NO decel popping at all.
Thanks TC. I think it was you that asked this question originally. Thumbs Up

RE: Stock Exhaust Mod - TCinNC_imp - 06-21-2016

(06-21-2016, 09:07 AM)Inhouse Bob_imp Wrote:
(06-21-2016, 07:12 AM)TCinNC_imp Wrote:
(06-21-2016, 12:03 AM)Inhouse Bob_imp Wrote: It's been asked before by others and ignored, but I'll ask again... do you get any popping on deceleration with this mod? I know that the air injecting PAIR valve thingie can be easily disabled and that's great, but I would rather not do that if it isn't necessary.
So. Popping. Yes or no.
Thanks!

I drilled 6 3/8 in holes and reinstalled the end cap. I have NO decel popping at all.

I drilled 6 3/8 in holes and reinstalled the end cap. I have NO decel popping at all.
Thanks TC. I think it was you that asked this question originally. Thumbs Up

I drilled 6 3/8 in holes and reinstalled the end cap. I have NO decel popping at all.
Thanks TC. I think it was you that asked this question originally. Thumbs Up You're welcome!!

RE: Stock Exhaust Mod - GaryMNM_imp - 06-23-2016

I went for the 8 x 3/8 holes (asymmetrically aligned for the OCD's).

Very slight tone improvement, no popping, backfire etc detected under heavy or light decel.



OK, here's a new link to a limited "after" clip taken with a plain ole no frills camera with a video option.




RE: Stock Exhaust Mod - Inhouse Bob - 06-23-2016

(06-23-2016, 07:12 AM)GaryMNM_imp Wrote: I went for the 8 x 3/8 holes (asymmetrically aligned for the OCD's).

Very slight tone improvement, no popping, backfire etc detected under heavy or light decel.



OK, here's a new link to a limited "after" clip taken with a plain ole no frills camera with a video option.

I just did exactly the same thing. As you say, a bit of a difference and no change in performance, popping, etc. I had fun playing with the drill, though! Banana

RE: Stock Exhaust Mod - the Ferret - 06-23-2016

(06-23-2016, 07:18 AM)Inhouse Bob_imp Wrote:
(06-23-2016, 07:12 AM)GaryMNM_imp Wrote: I went for the 8 x 3/8 holes (asymmetrically aligned for the OCD's).

Very slight tone improvement, no popping, backfire etc detected under heavy or light decel.



OK, here's a new link to a limited "after" clip taken with a plain ole no frills camera with a video option.

I just did exactly the same thing. As you say, a bit of a difference and no change in performance, popping, etc. I had fun playing with the drill, though! Banana

ROFL all worth it in the end then

RE: Stock Exhaust Mod - Randy B - 06-23-2016

Don't have access to view the video.

RE: Stock Exhaust Mod - Biggin_imp - 06-23-2016

did the same thing, with one addition, I cut the pipe off so the exhaust has a clear path. This helped the tone after putting end cap back on.
Used a dremel and cut about 3/8 out from the plate that holes were drilled in

RE: Stock Exhaust Mod - dsinned_imp - 06-23-2016

Biggin, please try to quantify the difference with and without tail pipe cut off, and how does it look with the end cap back on? TIA.

RE: Stock Exhaust Mod - Biggin_imp - 06-24-2016

(06-23-2016, 11:06 AM)dsinned_imp Wrote: Biggin, please try to quantify the difference with and without tail pipe cut off, and how does it look with the end cap back on? TIA.

The hole is obviously bigger without the pipe looks alright, seems to be little more rumble, not as airy sounding