+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: oil change (/showthread.php?tid=5537)
RE: oil change - Nano Tech_imp - 07-19-2013
(07-19-2013, 04:38 AM)The ferret_imp Wrote: Well furious has a point. The pants, be they jeans or riding pants have insulation qualities that protect you from the heat. Think this bike is hot? Try riding an ST1300 without proper riding pants in the summer.
Hi Ferret ,
Thanks , But the reason why brought this point was , I rode my bike with shorts-on several times before and I never felt this hot like yesterday .... May be I am hallucianting in broad daylight ....Thought of clarifying , cause this is the first time that i am doing something by my own like changing the oil and thought I messed up something ...
Also-- Thanks a lot for the comprehensive step by step instrction for the 600-Miles servicing ....
RE: oil change - the Ferret - 07-19-2013
glad the instructions could help. This bike is so simple to change oil pn its really hard to mess it up so Im sure you did fine.
Hmmm, Is it any hotter out , where you are now, than when you rode it before? My sources say it came with 10w 40 in it, so if you put 10/40 back in it, there should be no difference in heat the engine emits.
I run GN4 10w40 in mine and it was stinking hot this week riding when we weren't in the mountains. 75 degrees in the mountains, 95 degrees when we came down in the valleys. Wouldn't have wanted to be wearing shorts when riding in the valleys, thats for sure.
RE: oil change - wildezt_imp - 07-19-2013
Nanotech, it might be because you had your shorts on. Air cooled engines gets hot in second , try opening the throttle up while you are cruising for a quick acceleration and you can feel her roaring up and building up some good heat in a flash, she is a big air cooled 4 that's why. nothing to worry about.
RE: oil change - Nano Tech_imp - 07-19-2013
(07-19-2013, 05:25 AM)The ferret_imp Wrote: glad the instructions could help. This bike is so simple to change oil pn its really hard to mess it up so Im sure you did fine.
Hmmm, Is it any hotter out , where you are now, than when you rode it before? My sources say it came with 10w 40 in it, so if you put 10/40 back in it, there should be no difference in heat the engine emits.
I run GN4 10w40 in mine and it was stinking hot this week riding when we weren't in the mountains. 75 degrees in the mountains, 95 degrees when we came down in the valleys. Wouldn't have wanted to be wearing shorts when riding in the valleys, thats for sure.
Hi Ferret ....I am In Napervile IL and it's quite hot here and I use the exact oil (GN4 10w40 ) that you are referring . Any ways let's see . After all the advices from all of you I think it's nothing to worry abt...I will Plan for a trip tomorrow ... .....
(07-19-2013, 06:14 AM)wildezt_imp Wrote: Nanotech, it might be because you had your shorts on. Air cooled engines gets hot in second , try opening the throttle up while you are cruising for a quick acceleration and you can feel her roaring up and building up some good heat in a flash, she is a big air cooled 4 that's why. nothing to worry about.
Thanks Wildezt ......Very Nice piece of advice .....
RE: oil change - FUZZY_imp - 07-19-2013
I know people do but I'll never ride in shorts. Not condemning anyone. Their choice. Boots, gloves, long pants, glasses & lid @ a minimum for me. Even 1/2 mile trip to store.
RE: oil change - wildezt_imp - 07-19-2013
(07-19-2013, 12:43 PM)Nano Tech_imp Wrote:(07-19-2013, 05:25 AM)The ferret_imp Wrote: glad the instructions could help. This bike is so simple to change oil pn its really hard to mess it up so Im sure you did fine.
Hmmm, Is it any hotter out , where you are now, than when you rode it before? My sources say it came with 10w 40 in it, so if you put 10/40 back in it, there should be no difference in heat the engine emits.
I run GN4 10w40 in mine and it was stinking hot this week riding when we weren't in the mountains. 75 degrees in the mountains, 95 degrees when we came down in the valleys. Wouldn't have wanted to be wearing shorts when riding in the valleys, thats for sure.
Hi Ferret ....I am In Napervile IL and it's quite hot here and I use the exact oil (GN4 10w40 ) that you are referring . Any ways let's see . After all the advices from all of you I think it's nothing to worry abt...I will Plan for a trip tomorrow ... .....
(07-19-2013, 06:14 AM)wildezt_imp Wrote: Nanotech, it might be because you had your shorts on. Air cooled engines gets hot in second , try opening the throttle up while you are cruising for a quick acceleration and you can feel her roaring up and building up some good heat in a flash, she is a big air cooled 4 that's why. nothing to worry about.
Thanks Wildezt ......Very Nice piece of advice .....
NP at all Nano Tech!
(07-19-2013, 01:54 PM)FUZZY_imp Wrote: I know people do but I'll never ride in shorts. Not condemning anyone. Their choice. Boots, gloves, long pants, glasses & lid @ a minimum for me. Even 1/2 mile trip to store.
+100, you never know what comes around that corner, or what flies into your eyes.
RE: oil change - Nano Tech_imp - 07-19-2013
(07-19-2013, 01:58 PM)wildezt_imp Wrote:(07-19-2013, 12:43 PM)Nano Tech_imp Wrote:(07-19-2013, 05:25 AM)The ferret_imp Wrote: glad the instructions could help. This bike is so simple to change oil pn its really hard to mess it up so Im sure you did fine.
Hmmm, Is it any hotter out , where you are now, than when you rode it before? My sources say it came with 10w 40 in it, so if you put 10/40 back in it, there should be no difference in heat the engine emits.
I run GN4 10w40 in mine and it was stinking hot this week riding when we weren't in the mountains. 75 degrees in the mountains, 95 degrees when we came down in the valleys. Wouldn't have wanted to be wearing shorts when riding in the valleys, thats for sure.
Hi Ferret ....I am In Napervile IL and it's quite hot here and I use the exact oil (GN4 10w40 ) that you are referring . Any ways let's see . After all the advices from all of you I think it's nothing to worry abt...I will Plan for a trip tomorrow ... .....
(07-19-2013, 06:14 AM)wildezt_imp Wrote: Nanotech, it might be because you had your shorts on. Air cooled engines gets hot in second , try opening the throttle up while you are cruising for a quick acceleration and you can feel her roaring up and building up some good heat in a flash, she is a big air cooled 4 that's why. nothing to worry about.
Thanks Wildezt ......Very Nice piece of advice .....
NP at all Nano Tech!
(07-19-2013, 01:54 PM)FUZZY_imp Wrote: I know people do but I'll never ride in shorts. Not condemning anyone. Their choice. Boots, gloves, long pants, glasses & lid @ a minimum for me. Even 1/2 mile trip to store.
+100, you never know what comes around that corner, or what flies into your eyes.
NP at all Nano Tech!
(07-19-2013, 01:54 PM)FUZZY_imp Wrote: I know people do but I'll never ride in shorts. Not condemning anyone. Their choice. Boots, gloves, long pants, glasses & lid @ a minimum for me. Even 1/2 mile trip to store.
+100, you never know what comes around that corner, or what flies into your eyes.
Frankly speaking fuzzy/wildezt...I respect all of your advices and will try to stick to them....Just FYI I was wearing helmet...
RE: oil change - Obliviontoad - 07-20-2013
Just got done with my first change of oil. Oil plug was so loose I felt no effort in starting it and it came all the way out by hand. Used an extension on my filter, it too was ridiculously easy to start, and I was able to get it off with no trouble.
Sadly, the stupid filter wrench decided to be difficult after putting on the new filter, and wouldn't come off without some percussive maintenance.
Took 4 quarts and so far, its right above the full line, but that was after a short ride. I'll wring it or tomorrow.
RE: oil change - FUZZY_imp - 07-20-2013
(07-20-2013, 01:18 PM)Obliviontoad_imp Wrote: Just got done with my first change of oil. Oil plug was so loose I felt no effort in starting it and it came all the way out by hand. Used an extension on my filter, it too was ridiculously easy to start, and I was able to get it off with no trouble.
Sadly, the stupid filter wrench decided to be difficult after putting on the new filter, and wouldn't come off without some percussive maintenance.
Took 4 quarts and so far, its right above the full line, but that was after a short ride. I'll wring it or tomorrow.
Should only hand tighten new filter.
RE: oil change - meowguy_imp - 07-20-2013
My filter wrench is the Imperial IF-6514 and it was so tight I could not get on off the old filter and had to remove the socket handle and thread the whole assembly (filter and wrench) out between the pipes. Then when I tried it on the new filter I had no confidence I could get the wrench off when I was done tightening it.
Now although Car Talk's Ray Magliozzi has no use for a Dremel Motor Tool, I can assure you I do. I got out the old Dremel with a grinding stone and took about .003" off the inside surfaces of filter wrench.
My filter is installed to spec. and the wrench came off with a little back pressure on the socket handle. Here is a photo of my wrench.