+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Pirelli Angels - $25 gift cert on Revzilla (/showthread.php?tid=4765)
RE: Pirelli Angels - $25 gift cert on Revzilla - peterbaron - 08-10-2020
WSS/VSS (front & rear) air gap = 0.4 - 1.2 mm (0.02 - 0.05 in), also clean it and check for too much of magnetic debris on the sensor or if slot ring is bent after tires re-re.
P.S. Unlike Lord Popgun, I have all the specs in my head.....momentarily after reading my shop manual
RE: Pirelli Angels - $25 gift cert on Revzilla - Houtman_imp - 08-10-2020
(08-09-2020, 09:55 AM)The A-man_imp Wrote: I ordered my set yesterday at the Honda dealer in Asheville. Now i need to wait about a week until they come in!
Amos , are you riding your bike to MR or bringing the wheels in ?
Perhaps we can meet up for coffee/drink /lunch ?
RE: Pirelli Angels - $25 gift cert on Revzilla - The A-man - 08-10-2020
I'll PM you when i get an appointment. I expect it will be next week.
RE: Pirelli Angels - $25 gift cert on Revzilla - jmathis99_imp - 08-10-2020
Thanks for the tips! I’ll check it out and see what I can find.
RE: Pirelli Angels - $25 gift cert on Revzilla - jmathis99_imp - 08-11-2020
(08-09-2020, 06:41 AM)Lord Popgun_imp Wrote: Check the tone ring and make sure you didn’t bend it. Check the sensor for damage too.
Looks like I am an idiot and definitely bent the tone/pulser ring when installing the rear tire. It doesn't look too hard to replace so I will try to track down a new one and hope I didn't damage the sensor or any other parts since I rode a bit with the ring bent. Thanks for the tip Popgun!
RE: Pirelli Angels - $25 gift cert on Revzilla - Lord Popgun - 08-12-2020
Glad you found it! For a 2013 the pulser ring is ~$54 and the speed sensor is ~$132. Those are on-line prices on partsfish.com Other sites may charge less. Dealer prices are higher.
Unless you see damage on the sensor I'd just change the ring, check/set the gap and give it try first. Since it is measuring speed, it is most likely ok.