The CB1100 Community Forum
Cut Down NS EX Shield - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Cut Down NS EX Shield (/showthread.php?tid=9311)

Pages: 1 2 3 4 5 6 7 8 9

RE: Cut Down NS EX Shield - CIP57_imp - 01-13-2015

(01-13-2015, 01:10 PM)Dakota_imp Wrote: My ears ring after a ride even if wearing ear plugs. Did NS do any testing of this shield or did they just pick the closest standard shield off the shelf that would fit? Seems like NS should use this feedback to improve their design.

I spoke with them at length when i purchased my plexi 2 last month. They agreed with me regarding the shorter shield but have no intention of a shorter version. Its a 1 size fits all mentality.

The support of the EX four point is great, I've been way up in the MPH's and its very stable.

RE: Cut Down NS EX Shield - Django - 01-13-2015

Angle of mounting the shield is important and a few degrees can make a whole difference. I experimented a lot to find the best mount position for my MRA shield. No I've a really smooth ride also at high speed.

Most shields are mounted just to steep.

RE: Cut Down NS EX Shield - the Ferret - 01-14-2015

Here is my stock shield..there was a lot of protection but also a lot of buffeting or as someone put it "flag flapping noise"

[url=http://smg.photobucket.com/user/theferret111/media/Nov8ride007_zps687e6319.jpg.html][Image: 622fa4e4712061597c7caa6e343aec2a.jpg]

Cut down 4 1/4" to 13 3/4"

[url=http://smg.photobucket.com/user/theferret111/media/imagejpg2_zps119c534f.jpg.html][Image: d5726ec09444efba69fec24bc888381c.jpg]

on the bike ...hoping this will keep the wind off my chest but allow clean air to reach the helmet..

[url=http://smg.photobucket.com/user/theferret111/media/CBshieldcut008_zpsa8007ad4.jpg.html][Image: fe8814692aa0b06b39c6eb84c7eeb9b9.jpg]

Won't know until a thorough test ride when it warms up a bit

RE: Cut Down NS EX Shield - flynrider - 01-14-2015

Hard to say without a wind tunnel or a fast test ride.

I originally was going for the EX, but before pulling the trigger I made up some life size templates. From that I realized that what I really wanted should be drastically shorter and went with the smaller Deflector. At 10"-11" above the ignition (both CBs), everything above my chin is in clean air.

Now that it's winter and the CBs are sporting the bigger Plexi shields, they're tall enough that the wind starts right at the top of the helmet, keeping 90% of it out of turbulent air. Sounds like the EX put you right in between those two.

RE: Cut Down NS EX Shield - the Ferret - 01-14-2015

Yea Im a little bit afraid I didnt cut off enough.

RE: Cut Down NS EX Shield - DGShannon_imp - 01-15-2015

(01-14-2015, 08:15 AM)The ferret_imp Wrote: Yea Im a little bit afraid I didnt cut off enough.

That is nothing to be afraid of. It is cutting off too much that is hard to recover from!

RE: Cut Down NS EX Shield - Stratman_imp - 02-10-2015

Did you consider one of the smaller sheilds to begin with? Thinking about the F-16. Anyone have any experience with fitting one to one of our beloved Cb 1100?

RE: Cut Down NS EX Shield - the Ferret - 03-27-2015

So the saga continues. Today after reading Steve from Darts answers to my questions about the Dart shield, and after a pm and reply from Ptero, I decided what the heck, grabbed the Street Shield EX and cut off another 3", so now from bottom of headlight cutout to top of shield it measures 10" ( down from 17"). Looks kind of weird, ( the world's widest Dart screen? Lol) but it should be real steady with the 4 point mount and CIP "GUARANTEES" me this will be the cats meow. No more flag flapping noise, just clean air for my head, and protection for my chest. Have it all sanded and flame burnished and will try and get it installed and test ridden this weekend.

[url=http://smg.photobucket.com/user/theferret111/media/critters%20and%20windshield%20032_zpse99ugrri.jpg.html][Image: ce8c24187f8c5c0f3f32d54ccba6ccb7.jpg]

Cut Down NS EX Shield - Cormanus - 03-27-2015

Be interested to hear how it goes.

RE: Cut Down NS EX Shield - Papa Weeley_imp - 03-27-2015

Yeah, me too, since I have the same one and felt like I was in the middle of a hurricane (noise-wise) with mine!