The CB1100 Community Forum
Lockhart Phillips Turn Signals-Lucas Tail Light - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Lockhart Phillips Turn Signals-Lucas Tail Light (/showthread.php?tid=9930)

Pages: 1 2 3 4 5

RE: Lockhart Phillips Turn Signals-Lucas Tail Light - jimgl3_imp - 03-22-2017

that is an extremely nice look, but in Honda's defense, if you have the stock Honda luggage rack like I do, it becomes obvious why the tail light is so far out there and the size it is. turn signals are a different story. very nice!

RE: Lockhart Phillips Turn Signals-Lucas Tail Light - Bazbro_imp - 03-02-2019

Has anybody fitted the K10 Samurider "CB750-style" tail-light? How does it compare to the standard item?

I need to replace the entire rear mudguard (fender) complete with tail-light and as I'm fitting the K17 tank, front mudguard, their "CB750-style" tail-light seems the obvious choice. Probably cheaper than stock, too!

RE: Lockhart Phillips Turn Signals-Lucas Tail Light - baxtercat_imp - 03-02-2019

(03-02-2019, 12:14 AM)Bazbro_imp Wrote: Has anybody fitted the K10 Samurider "CB750-style" tail-light? How does it compare to the standard item?

I need to replace the entire rear mudguard (fender) complete with tail-light and as I'm fitting the K17 tank, front mudguard, their "CB750-style" tail-light seems the obvious choice. Probably cheaper than stock, too!

Hi Baz. When I had my 2013, I replaced the stock taillight with the K10 item. It is a quality piece of kit, chromed steel instead of the plastic, and far less bulky. Installation was not that difficult, but be advised that you re-use one hole in the rear fender and drill two more for the new taillight, and you will probably want to plug the original hole left empty when the bigger unit vacates it. (You can find chrome plugs or appropriately sized bolts and washers for this.) But the wiring is straightforward, and the supplied instructions are pretty good. I would have done this mod to my 2017 last year, but the new taillight is LED and a different shape lens, and Whitehouse did not develop an updated version--the K17 unit is the same as the K10, according to Takashi. Happy to answer any questions if you move forward with this.



RE: Lockhart Phillips Turn Signals-Lucas Tail Light - Bazbro_imp - 03-02-2019

(03-02-2019, 02:31 AM)baxtercat_imp Wrote:
(03-02-2019, 12:14 AM)Bazbro_imp Wrote: Has anybody fitted the K10 Samurider "CB750-style" tail-light? How does it compare to the standard item?

I need to replace the entire rear mudguard (fender) complete with tail-light and as I'm fitting the K17 tank, front mudguard, their "CB750-style" tail-light seems the obvious choice. Probably cheaper than stock, too!

Hi Baz. When I had my 2013, I replaced the stock taillight with the K10 item. It is a quality piece of kit, chromed steel instead of the plastic, and far less bulky. Installation was not that difficult, but be advised that you re-use one hole in the rear fender and drill two more for the new taillight, and you will probably want to plug the original hole left empty when the bigger unit vacates it. (You can find chrome plugs or appropriately sized bolts and washers for this.) But the wiring is straightforward, and the supplied instructions are pretty good. I would have done this mod to my 2017 last year, but the new taillight is LED and a different shape lens, and Whitehouse did not develop an updated version--the K17 unit is the same as the K10, according to Takashi. Happy to answer any questions if you move forward with this.

Hi Baz. When I had my 2013, I replaced the stock taillight with the K10 item. It is a quality piece of kit, chromed steel instead of the plastic, and far less bulky. Installation was not that difficult, but be advised that you re-use one hole in the rear fender and drill two more for the new taillight, and you will probably want to plug the original hole left empty when the bigger unit vacates it. (You can find chrome plugs or appropriately sized bolts and washers for this.) But the wiring is straightforward, and the supplied instructions are pretty good. I would have done this mod to my 2017 last year, but the new taillight is LED and a different shape lens, and Whitehouse did not develop an updated version--the K17 unit is the same as the K10, according to Takashi. Happy to answer any questions if you move forward with this.
Many thanks for that, Bax. That's just what I needed to know!
Best wishes.

RE: Lockhart Phillips Turn Signals-Lucas Tail Light - GoldOxide_imp - 03-02-2019

(03-02-2019, 02:31 AM)baxtercat_imp Wrote:
(03-02-2019, 12:14 AM)Bazbro_imp Wrote: Has anybody fitted the K10 Samurider "CB750-style" tail-light? How does it compare to the standard item?

I need to replace the entire rear mudguard (fender) complete with tail-light and as I'm fitting the K17 tank, front mudguard, their "CB750-style" tail-light seems the obvious choice. Probably cheaper than stock, too!

Hi Baz. When I had my 2013, I replaced the stock taillight with the K10 item. It is a quality piece of kit, chromed steel instead of the plastic, and far less bulky. Installation was not that difficult, but be advised that you re-use one hole in the rear fender and drill two more for the new taillight, and you will probably want to plug the original hole left empty when the bigger unit vacates it. (You can find chrome plugs or appropriately sized bolts and washers for this.) But the wiring is straightforward, and the supplied instructions are pretty good. I would have done this mod to my 2017 last year, but the new taillight is LED and a different shape lens, and Whitehouse did not develop an updated version--the K17 unit is the same as the K10, according to Takashi. Happy to answer any questions if you move forward with this.

Hey baxtercat: Don't see many blue CB1100's from down there. Nice showing.

RE: Lockhart Phillips Turn Signals-Lucas Tail Light - baxtercat_imp - 03-02-2019

(03-02-2019, 04:56 AM)GoldOxide_imp Wrote:
(03-02-2019, 02:31 AM)baxtercat_imp Wrote:
(03-02-2019, 12:14 AM)Bazbro_imp Wrote: Has anybody fitted the K10 Samurider "CB750-style" tail-light? How does it compare to the standard item?

I need to replace the entire rear mudguard (fender) complete with tail-light and as I'm fitting the K17 tank, front mudguard, their "CB750-style" tail-light seems the obvious choice. Probably cheaper than stock, too!

Hi Baz. When I had my 2013, I replaced the stock taillight with the K10 item. It is a quality piece of kit, chromed steel instead of the plastic, and far less bulky. Installation was not that difficult, but be advised that you re-use one hole in the rear fender and drill two more for the new taillight, and you will probably want to plug the original hole left empty when the bigger unit vacates it. (You can find chrome plugs or appropriately sized bolts and washers for this.) But the wiring is straightforward, and the supplied instructions are pretty good. I would have done this mod to my 2017 last year, but the new taillight is LED and a different shape lens, and Whitehouse did not develop an updated version--the K17 unit is the same as the K10, according to Takashi. Happy to answer any questions if you move forward with this.

Hey baxtercat: Don't see many blue CB1100's from down there. Nice showing.

Hey baxtercat: Don't see many blue CB1100's from down there. Nice showing. New England. practically Canada.

RE: Lockhart Phillips Turn Signals-Lucas Tail Light - MaFiHa_imp - 03-03-2019

I attached "Kellermann" turn signals to my RS, instead of this ugly
plastic-things that come original with the bike... .

[url=https://s1082.photobucket.com/user/Markus_Hagen/media/70FA3919-0ED7-4210-BFD7-2935C798802E_zpslccctrzl.jpeg.html][Image: 64ffbf7aa8e1f0350e54e34b996f59fa.jpeg]

[url=http://s1082.photobucket.com/user/Markus_Hagen/media/4DC4AC7D-08B0-430E-A140-6D45140E73A1_zpso95ykmp9.jpeg.html][Image: 6e4cd6773d5898220549d30c4c7950e2.jpeg]

[url=http://s1082.photobucket.com/user/Markus_Hagen/media/88EC88BD-7C17-453D-8CBC-11FBE5A74AD3_zpswnmqip66.jpeg.html][Image: 06f17497df30c68ca8bb70d8d2dabe02.jpeg]

RE: Lockhart Phillips Turn Signals-Lucas Tail Light - Cormanus - 03-03-2019

Very snappy, Markus.

RE: Lockhart Phillips Turn Signals-Lucas Tail Light - GoldOxide_imp - 03-03-2019

Those are tidy Markus. Thanks for sharing that idea.

RE: Lockhart Phillips Turn Signals-Lucas Tail Light - MaFiHa_imp - 03-05-2019

(03-03-2019, 11:17 PM)GoldOxide_imp Wrote: Those are tidy Markus. Thanks for sharing that idea.

My pleasure.
And they are really bright Cool