![]() |
|
While I am Waiting..... - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: While I am Waiting..... (/showthread.php?tid=9528) |
RE: While I am Waiting..... - Lord Popgun - 12-04-2015 My MOM was a CPO in WWII and my Dad was 'only' a 1st class
RE: While I am Waiting..... - Bokobob_imp - 12-06-2015 (11-28-2015, 07:05 AM)4myredhonda_imp Wrote: Okay...Already...So far out of 155 views, one person gives my grips a thumbs up and another guy thinks they are different. I get it...alright. No hard feelings. To each their own.Hey, the grips are great...good work..very innovative on your part. Where do you put the air hose to blow off the grips? (color me dumb). RE: While I am Waiting..... - 4myredhonda_imp - 12-06-2015 [/quote] Hey, the grips are great...good work..very innovative on your part. Where do you put the air hose to blow off the grips? (color me dumb). [/quote] Hey Bokobob, You need to use an air-dork and point/slip it in between the grip and the handle bar. Lift the edge of the grip at the end of the handlebar with a screw driver and poke the air dork in between the grip and the handle bar. Then give it a shot of air. Might have to twist and pull on the grip a bit, but it should come off, maybe not all at once. Slide the air dork up in there as you go and keep twisting and pulling while shooting it with the air. It should come off without too much trouble. Hope this helps. Regards, RE: While I am Waiting..... - Riko_imp - 12-20-2015 (11-28-2015, 12:31 PM)4myredhonda_imp Wrote: Hi Ferret, you should see the UK board, I copy/paste my loooooong introduction on their New Members section and.....NO replies. I already gave up on commenting the non-commenters. RE: While I am Waiting..... - Lord Popgun - 12-20-2015 Riko, I, ferret, and some others joined that board when the '13s first came out, but it was pretty quiet and mostly UK members. So when Guth turned on this board I pretty much jumped ship and don't check over there much anymore. Its funny how some forums just take off and some don't. RE: While I am Waiting..... - 4myredhonda_imp - 12-21-2015 (11-28-2015, 07:05 AM)4myredhonda_imp Wrote: Okay...Already...So far out of 155 views, one person gives my grips a thumbs up and another guy thinks they are different. I get it...alright. No hard feelings. To each their own. Just got word (Takashi mail tracking) that my Comet 2 fairing is at Chicago. Ought to have it in a few days. Looking forward to opening the box! Sport trunk seat is due sometime end of January. Takashi really provides good customer service and this forum is the best for all things CB1100.
While I am Waiting..... - Verdecken_imp - 12-21-2015 What's the difference between the comet 1 and 2 and so forth? The pics look the same? Sent from my iPhone using Tapatalk RE: While I am Waiting..... - Riko_imp - 12-21-2015 no, they look different, watch closely RC2 ![]() ![]() RC1 ![]() ![]() The RC2 is also slightly wider the lip area is different the lipline runs all the way to the bolts on both sides on the RC2, not on the RC1 Personally I prefer the RC1 because of that strange lipline on the RC2, it just looks weird.... Side by side ![]()
While I am Waiting..... - Verdecken_imp - 12-21-2015 Oh I see!! Thanks for that. RC2 is a little more angular and aggressive. I think it would look pretty good on the black to give it more lines. Sent from my iPhone using Tapatalk RE: While I am Waiting..... - Riko_imp - 12-21-2015 i think the RC2 has a smiley face caused by that lip each his own of course
|