+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Engine guards (/showthread.php?tid=8372)
RE: Engine guards - Wind_imp - 07-05-2020
The green tank is a custom painting work (and the seat as well). Original color was black.
RE: Engine guards - Bheezy27403_imp - 07-05-2020
Well played sir. That may be the purtiest CB I have ever seen.
RE: Engine guards - DBXXX_imp - 07-06-2020
Yeah that diamond pattern seat + racing green is probably the best color combo I've seen on this bike!
RE: Engine guards - michael1954 - 07-06-2020
(07-05-2020, 12:43 AM)Wind_imp Wrote: Dears,
I return on this old conversation to thank you all again for the precious advices.
It has been a quite busy period that kept me away from the forum (and the CB as well).
I ended up with purchasing the original honda engine guards. I decided to go for the honda because I found them less obtrusive and secured to the frame not in the same points the engine is fixed.
I took the chance to combine the purchase with a new chrome chain guard, replacing the original plastic one. Now the bike is faster and runs much smoother
The pictures are not the best, taken in the garage, but I want to share the result to you all.
Safe rides! Cheers!
(04-13-2020, 01:51 AM)pdedse_imp Wrote: SW..."untested" so far. I like black for engine guards. Variouis angles:
![[Image: 273747e08753b7417b72cfb13c30da05.jpg]](https://cb1100forum.net/forum/uploads/imp/273747e08753b7417b72cfb13c30da05.jpg)
![[Image: d405dc680f5b4b72c512a6ca8dda5c61.jpg]](https://cb1100forum.net/forum/uploads/imp/d405dc680f5b4b72c512a6ca8dda5c61.jpg)
![[Image: fe7ce2144ffccd00626280238ab7f73c.jpg]](https://cb1100forum.net/forum/uploads/imp/fe7ce2144ffccd00626280238ab7f73c.jpg)
![[Image: 84295680d12e6984ca6879c02e05fb64.jpg]](https://cb1100forum.net/forum/uploads/imp/84295680d12e6984ca6879c02e05fb64.jpg)
![[Image: e08082c74108516892d61ecf5f59e038.jpg]](https://cb1100forum.net/forum/uploads/imp/e08082c74108516892d61ecf5f59e038.jpg)
![[Image: 06fc3dc2c754932c199ae1a844c7383b.jpg]](https://cb1100forum.net/forum/uploads/imp/06fc3dc2c754932c199ae1a844c7383b.jpg)
Got these off ebay from China. Look similar to the Mo-techs I have on the '13 CB. They attached in a slightly different way. I had to add caps to keep from a potential scratch.
![[Image: dce145b5899d76f2861e0ce5c39bf376.jpg]](https://cb1100forum.net/forum/uploads/imp/202007/dce145b5899d76f2861e0ce5c39bf376.jpg)
Check out the radiator screen. I see so few here protected and they aint cheap to replace. Got one for both CB's off ebay again, from China for about $35. They allow plenty of air and look good too with the CB1100 logo at the bottom.