+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Tall Windshield (/showthread.php?tid=8271)
RE: Tall Windshield - jimgl3_imp - 11-01-2020
(06-13-2017, 04:32 PM)darkangel_imp Wrote: I'm using Givi Airflow AF49, its advantage is its heigh can be adjusted. And it is 4 points mounted so it's very durable, no shaky under high wind.
![[Image: 4474574e1725ca2e12d3f45fa68952eb.jpg]](https://cb1100forum.net/forum/uploads/imp/4474574e1725ca2e12d3f45fa68952eb.jpg)
I want one!!!
RE: Tall Windshield - jimgl3_imp - 11-06-2020
These are IMPOSSIBLE to acquire! 3 sites say "in stock". All 3 cancel and say oops! sorry! on back order a week or so... so after 3 sites, that makes 3 weeks or so!
RE: Tall Windshield - Lord Popgun - 11-06-2020
You might call Givi and ask about availability:
North Carolina Location Nevada Location
9309 Forsyth Park Dr. 506 E. Glendale Ave
Charlotte, NC 28273 Sparks, NV 89431
United States United States
(704) 679-4123 (775) 359-0900
Sorry about the listing, the copy and paste formatting didn't work right. North Carolina is the 704 number. NV is the 775 number.
RE: Tall Windshield - BestStandard_imp - 11-06-2020
One left on Ebay:
https://www.ebay.com/p/665122937
RE: Tall Windshield - stefanpyra_imp - 12-15-2020
Now Kappa is selling this model as KAF49
https://www.kappamoto.com/Screens--spoilers/
RE: Tall Windshield - LakeWylieJoe_imp - 12-16-2020
I think the bike in the garage on the original photo is sporting an Arizona plate. The stucco on the house suggests that's correct as well. :-)
RE: Tall Windshield - White Dog_imp - 12-23-2020
I have a PS2 shield on my '14 Std. However, there is a space from the bottom curve (above the headlight) to the top of the headlight of about 4". I have the bottom of the shield about 1/4" above the turn signals. I've lived with this for several years. Looking at the turn signal brackets last night I may have found a way to lower the windshield down onto the top of the headlight by using the lower bolt in the headlight bracket only to remount the turn signals. This would gain me about 3" elimination of the air hole. Any thoughts to this?
RE: Tall Windshield - Alfgaxatico_imp - 12-24-2020
The best for not wind .. is a GoldWing .. or my car. I rember that’s a motorcycle naked..
This is one the mark of CB1100 ...
RE: Tall Windshield - White Dog_imp - 12-24-2020
(12-24-2020, 05:30 AM)Alfgaxatico_imp Wrote: The best for not wind .. is a GoldWing .. or my car. I rember that’s a motorcycle naked..I don't disagree but my Goldwing was terribly heavy and hard to handle, so I sold it.
This is one the mark of CB1100 ...
RE: Tall Windshield - the Ferret - 12-24-2020
(12-23-2020, 01:34 AM)White Dog_imp Wrote: I have a PS2 shield on my '14 Std. However, there is a space from the bottom curve (above the headlight) to the top of the headlight of about 4". I have the bottom of the shield about 1/4" above the turn signals. I've lived with this for several years. Looking at the turn signal brackets last night I may have found a way to lower the windshield down onto the top of the headlight by using the lower bolt in the headlight bracket only to remount the turn signals. This would gain me about 3" elimination of the air hole. Any thoughts to this?
Well if you lower the bottom you will also lower the top which could increase spill over and buffeting. Everything is a compromise.