+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: to puig or not to puig (or, which Puig screens fit ?) (/showthread.php?tid=8050)
RE: to puig or not to puig (or, which Puig screens fit ?) - GoldOxide_imp - 03-03-2022
That CB1100 gets some fine treatment it so appears olafurarason.
RE: to puig or not to puig (or, which Puig screens fit ?) - Enzofour_imp - 03-03-2022
I agree, I don't like the screen mountings on the handlebar
RE: to puig or not to puig (or, which Puig screens fit ?) - GoldOxide_imp - 03-03-2022
(03-03-2022, 05:57 PM)Enzofour_imp Wrote: I agree, I don't like the screen mountings on the handlebar
Yeah, it never seems to look well on classic street bikes and some cruisers.
RE: to puig or not to puig (or, which Puig screens fit ?) - Wagonpeddler_imp - 03-11-2022
Looks like some the Puig shields attach ONLY to the headlight ears. Could that be? No bar support brackets?
I have a Nat'l Cycle shield that works well, but I find that the all the support hardware a little too much. I like the shield, however.
RE: to puig or not to puig (or, which Puig screens fit ?) - GoldOxide_imp - 03-11-2022
(03-11-2022, 08:41 PM)Wagonpeddler_imp Wrote: Looks like some the Puig shields attach ONLY to the headlight ears. Could that be? No bar support brackets?
I have a Nat'l Cycle shield that works well, but I find that the all the support hardware a little too much. I like the shield, however.
The Dart Marlin (and I think the original Dart windscreen) attaches to the headlight only too.
RE: to puig or not to puig (or, which Puig screens fit ?) - j3gq_imp - 04-03-2022
They do, but customer reviews say that the bracket is not really made for the CB1100, and that the screen easily cracks around the bracket.
RE: to puig or not to puig (or, which Puig screens fit ?) - GoldOxide_imp - 04-03-2022
(04-03-2022, 08:06 AM)j3gq_imp Wrote: They do, but customer reviews say that the bracket is not really made for the CB1100, and that the screen easily cracks around the bracket.
I did not experience any of the said circumstances. At least for the Marlin, the bracket worked just fine.
RE: to puig or not to puig (or, which Puig screens fit ?) - Enzofour_imp - 04-03-2022
Puig I have used it for too little time to check for any breakages. The problem that conveys all the air on the upper part of the body creating an annoying flow.
Personally I prefer without the fairing and feel the air distributed on the body evenly.
RE: to puig or not to puig (or, which Puig screens fit ?) - Haggard Rider_imp - 04-03-2022
Having tried a Dart Marlin, an MRA Custom shield and a Puig bikini-style fairing on both RS and non-RS CB1100's, for me, nothing works better than nothing at all.
Both the Dart and the Puig concentrate the wind across my upper chest, shoulders and base of the helmet creating much more noise and a greater sensitivity to air blast from other vehicles.
The MRA, which I used only once (and with a top deflector fitted) produced a very weird effect - I first noticed it after about 30mins of use when the characters on a big illuminated motorway/highway dot-matrix sign appeared to be blurred/vibrating. Nothing else looked like the though.
Anyway, an hour or so later I stopped for petrol, got off the bike and promptly staggered for a couple of steps or so (never done that before). Put that down to old age and galloping senility.
Another hour after that, I stopped at a POI site. Got off the bike, staggered again, brain felt mushy, tried and failed to think of words when engaged in conversation, but felt 'ok in myself'.
Got home, tried to do my normal full-lock u-turn on my sloping drive and dropped the bike! Certainly not done that before, with any bike!! No damage done except to a frame slider and RLET
What i think may have been the cause was something like a high frequency 'micro-buffeting' effect from the MRA screen which was kind of oscillating/bouncing, especially when on less smooth road surfaces, as it had only the two bar bars to hold it steady/fixed.
I've no idea if this was the actual case, or if I was 'ill' but I took that screen off as soon as I got the bike into the garage! Not had the same symptoms since.
Just something that happened to me and you may want to be aware of.
Of course, YMMV!!
RE: to puig or not to puig (or, which Puig screens fit ?) - GoldOxide_imp - 04-03-2022
Scary experience Haggard Rider, and definitely worth sharing to all riders.
If the machine and/or attachments "hurts" the body, then that is a flag an adjustment is needed somewhere, or the bike was never optimal for the rider. Glad you are able to tell the story.