+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: License Plate screws. (/showthread.php?tid=6136)
RE: License Plate screws. - the Ferret - 01-21-2014
Dang sorry to hear that Houtman. Get well fast.
License Plate screws. - Elipten_imp - 01-21-2014
Been there with a prostrate infection and kidney stones. Flomax is your friend and an antibiotic, with drinking plenty of fluids.
I feel for you and hope you are back at it soon. I did rig a calf bag and was mobile and rode last year through it all.
Sent from my iPad using [url=http://tapatalk.com/m?id=1]Tapatalk
License Plate screws. - Pauley - 01-21-2014
That's hard core, elipten. I admire your dedication.
Sent from my iPhone using [url=http://tapatalk.com/m?id=1]Tapatalk
RE: License Plate screws. - SanPete_imp - 01-21-2014
A true ride
Sent from my SPH-L710 using Tapatalk [url=http://'http://tapatalk.com/m?id=10']now Free
RE: License Plate screws. - Guth_imp - 01-21-2014
Hang in there Houtman. Wishing you all the best.
RE: License Plate screws. - oldstingray_imp - 02-14-2014
I use the reflectors with springs and wing nuts on my CB1100 and my CB750F. I have never lost one.
RE: License Plate screws. - Lord Popgun - 02-14-2014
Maybe its my aviation maint. background, but thoses springs and wing nuts just don't do it for me so I usually ditch them and use a nut and lockwasher. But whatever works!
RE: License Plate screws. - redbirds_imp - 02-14-2014
I like to use stainless steel bolts with nylon lock nuts. I don't like the look of a reflector anywhere on a bike.
(01-14-2014, 06:02 AM)Rboe_imp Wrote: Geez; all these old farts around here, you'd think I was still on the Moto Guzzi site.
Least no one has mentioned red suspenders or corn cob pipes yet.
RE: License Plate screws. - Rolls_imp - 02-15-2014
Sorry to hear the bad news, Houtman. Hope you're on the mend. Will keep a good thought.
RE: License Plate screws. - flynrider - 02-15-2014
(02-14-2014, 08:39 PM)Lord Popgun_imp Wrote: Maybe its my aviation maint. background, but thoses springs and wing nuts just don't do it for me so I usually ditch them and use a nut and lockwasher. But whatever works!
What, no safety wire?
