+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Oil Leak! Please help (/showthread.php?tid=5827)
RE: Oil Leak! Please help - jodyz_imp - 05-27-2015
(05-26-2015, 11:05 AM)SanPete_imp Wrote:Forgive me for butting in but I believe the fix was described on post #18.(05-26-2015, 08:50 AM)ish_imp Wrote: My bike has a leak in the same area. Not sure if i should wait until i check the valves or try to fix it.Forgive me for butting in but I believe the fix was described on post #18.
Let us know how you fix the problem. My area is exactly the same.
thanks
-Ish
I really think this was a well documented problem on the 2013 (and earlier 2010-on) if it's coming out from around the cam end cap. Heck, I found out about it by searching the internet; printed the symptoms/fix people described; showed it to my dealer who wasn't aware at all about any problems. Dealer contacted American Honda, who contacted Honda Japan and they somehow confirmed the gasket install defect. Granted, my fix was under warranty, but I would certainly argue the point with the dealer/Honda before pulling anything apart myself.
RE: Oil Leak! Please help - Xyzzy_imp - 05-27-2015
(05-27-2015, 11:15 AM)Lord Popgun_imp Wrote: Sorry Xyzzy, I guess I didn't notice you posted the link that I did. Reading is fundamental
That's cool! Great minds think alike!
I have an email exchange going on with ThreeBond right now. Apparently this stuff is made in Japan and not easy to get. I wonder what the dealers use? (Maybe I don't want to know!)
RE: Oil Leak! Please help - Lord Popgun - 05-27-2015
Well obviously they use the "equivalent"
RE: Oil Leak! Please help - Xyzzy_imp - 06-04-2015
(05-27-2015, 12:07 PM)Xyzzy_imp Wrote:(05-27-2015, 11:15 AM)Lord Popgun_imp Wrote: Sorry Xyzzy, I guess I didn't notice you posted the link that I did. Reading is fundamental
That's cool! Great minds think alike!
I have an email exchange going on with ThreeBond right now. Apparently this stuff is made in Japan and not easy to get. I wonder what the dealers use? (Maybe I don't want to know!)
Good news!
Quote:Michael,
You can try Yamabond #4. You can purchase this an any Yamaha Dealer.
Thanxs,
Cincinnati Sales Department
ThreeBond International, Inc.
6184 Schumacher Park Drive
West Chester, OH 45069
PH: 513-779-7300
FX: 513-779-7375
http://www.threebond.com