+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Fabbing an adaptor to move signals back. May duplicate for y'all (/showthread.php?tid=10102)
RE: Fabbing an adaptor to move signals back. May duplicate for y'all - dBuster_imp - 04-15-2014
Now that is a question. Inline with the rail or parallel to the deck... Hmmm
Still looks good though! Mighty good! Now to test with some bags to see if they are clear of the bags
Sent from my XT1055 using Tapatalk
Fabbing an adaptor to move signals back. May duplicate for y'all - Romo1969_imp - 04-22-2014
Closer and closer. Final tweaks. Then production
![[Image: af893cfd0adf5459d79566b6b16da575.jpg]](https://cb1100forum.net/forum/uploads/imp/201404/af893cfd0adf5459d79566b6b16da575.jpg)
![[Image: 8a864e3e377eae470d99b20223dc748a.jpg]](https://cb1100forum.net/forum/uploads/imp/201404/8a864e3e377eae470d99b20223dc748a.jpg)
Sent from my iPad using Tapatalk
RE: Fabbing an adaptor to move signals back. May duplicate for y'all - dBuster_imp - 04-22-2014
Lookin mighty good. Any estimate on cost yet?
Sent from my XT1055 using Tapatalk
Fabbing an adaptor to move signals back. May duplicate for y'all - Romo1969_imp - 04-22-2014
None.
Have to maybe post a thread later and see what quantity would be in relation to cost
Sent from my iPad using Tapatalk
RE: Fabbing an adaptor to move signals back. May duplicate for y'all - Cormanus - 04-22-2014
Lovely job.
RE: Fabbing an adaptor to move signals back. May duplicate for y'all - Lord Popgun - 04-22-2014
I'm in!!
Will our stock lights fit? Sorry if thats been asked...
Re: Fabbing an adaptor to move signals back. May duplicate for y'all - dBuster_imp - 04-22-2014
It was being designed to accommodate the stock signals but I believe an electrical harness extension would be required.
Sent from my XT1055 using Tapatalk
RE: Fabbing an adaptor to move signals back. May duplicate for y'all - Lord Popgun - 04-23-2014
(04-22-2014, 10:23 PM)dBuster_imp Wrote: It was being designed to accommodate the stock signals but I believe an electrical harness extension would be required.
Sent from my XT1055 using Tapatalk
dbuster,
Great! I'm an electronics tech so wiring it or getting an extension as shown above somewhere is no biggie.
Thanks.
Fabbing an adaptor to move signals back. May duplicate for y'all - Romo1969_imp - 04-23-2014
There will need to be a wire extension. No biggie for most people to handle. The wire will run through the chase shown as to be clean of wires
Sent from my iPhone using Tapatalk
Re: RE: Fabbing an adaptor to move signals back. May duplicate for y'all - dBuster_imp - 04-23-2014
(04-23-2014, 12:23 AM)Lord Popgun_imp Wrote:(04-22-2014, 10:23 PM)dBuster_imp Wrote: It was being designed to accommodate the stock signals but I believe an electrical harness extension would be required.
Sent from my XT1055 using Tapatalk
dbuster,
Great! I'm an electronics tech so wiring it or getting an extension as shown above somewhere is no biggie.
Thanks.
Are you going to be making the extension harnesses to go along with this wonderful fabrication work?
Was just pointing out that it would work with our stock signals but you were on your own for the harness extensions. Basically I answered your original question I thought...
Sent from my XT1055 using Tapatalk