+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Higher Corbin Seat (/showthread.php?tid=9558)
RE: Higher Corbin Seat - holy666diver_imp - 04-14-2015
photos aren't working!
RE: Higher Corbin Seat - AndyHe_imp - 04-14-2015
I've got a corbin on order but am considering asking them to do the higher one as I'm 6'2". Would you repost picture of the higher one? thanks.
RE: Higher Corbin Seat - treytexag_imp - 04-14-2015
(04-14-2015, 09:03 AM)AndyHe_imp Wrote: I've got a corbin on order but am considering asking them to do the higher one as I'm 6'2". Would you repost picture of the higher one? thanks.
I too would like to see the pic of the higher corbin. Also, could you also post a pic of the vario peg like you've set it up?
Thanks.
RE: Higher Corbin Seat - EarsOnWheels_imp - 07-20-2015
Anyone have photos of the taller seat?
RE: Higher Corbin Seat - Gumby 1100_imp - 07-20-2015
(07-20-2015, 06:30 AM)EarsOnWheels_imp Wrote: Anyone have photos of the taller seat?
There were photos posted of a 1" Taller Corbin, but I didn't like the look...kind of like an overstuffed sofa. It had lost the clearly defined step between the front and passenger sections.
If you can wait a week or so, my 1/2" (.5") Taller Corbin should have cleared customs by then. I requested that BOTH the front and passenger sections be 1/2" taller, so hopefully, I'll still get that nice step for lower back support.
I'll try to post some pix as soon as I have it mounted.
RE: Higher Corbin Seat - the_undecider_imp - 07-20-2015
(07-20-2015, 06:35 AM)Gumby 1100_imp Wrote:(07-20-2015, 06:30 AM)EarsOnWheels_imp Wrote: Anyone have photos of the taller seat?
There were photos posted of a 1" Taller Corbin, but I didn't like the look...kind of like an overstuffed sofa. It had lost the clearly defined step between the front and passenger sections.
If you can wait a week or so, my 1/2" (.5") Taller Corbin should have cleared customs by then. I requested that BOTH the front and passenger sections be 1/2" taller, so hopefully, I'll still get that nice step for lower back support.
I'll try to post some pix as soon as I have it mounted.
There were photos posted of a 1" Taller Corbin, but I didn't like the look...kind of like an overstuffed sofa. It had lost the clearly defined step between the rider and passenger sections.
If you can wait a week or so, my 1/2" (.5") Taller Corbin should have cleared customs by then. I'll try to post some pix as soon as I have it mounted.
I also saw those pictures of the 1 inch taller Corbin and agree it looked a little overstuffed.
RE: Higher Corbin Seat - the_undecider_imp - 08-11-2015
(07-20-2015, 06:35 AM)Gumby 1100_imp Wrote:(07-20-2015, 06:30 AM)EarsOnWheels_imp Wrote: Anyone have photos of the taller seat?
There were photos posted of a 1" Taller Corbin, but I didn't like the look...kind of like an overstuffed sofa. It had lost the clearly defined step between the front and passenger sections.
If you can wait a week or so, my 1/2" (.5") Taller Corbin should have cleared customs by then. I requested that BOTH the front and passenger sections be 1/2" taller, so hopefully, I'll still get that nice step for lower back support.
I'll try to post some pix as soon as I have it mounted.
There were photos posted of a 1" Taller Corbin, but I didn't like the look...kind of like an overstuffed sofa. It had lost the clearly defined step between the front and passenger sections.
If you can wait a week or so, my 1/2" (.5") Taller Corbin should have cleared customs by then. I requested that BOTH the front and passenger sections be 1/2" taller, so hopefully, I'll still get that nice step for lower back support.
I'll try to post some pix as soon as I have it mounted.
Gumby,
Do you have some photos of your 1/2 inch taller Corbin? I'm thinking of ordering one. Thanks.
RE: Higher Corbin Seat - Gumby 1100_imp - 08-11-2015
(08-11-2015, 11:54 AM)the_undecider_imp Wrote:(07-20-2015, 06:35 AM)Gumby 1100_imp Wrote:(07-20-2015, 06:30 AM)EarsOnWheels_imp Wrote: Anyone have photos of the taller seat?
There were photos posted of a 1" Taller Corbin, but I didn't like the look...kind of like an overstuffed sofa. It had lost the clearly defined step between the front and passenger sections.
If you can wait a week or so, my 1/2" (.5") Taller Corbin should have cleared customs by then. I requested that BOTH the front and passenger sections be 1/2" taller, so hopefully, I'll still get that nice step for lower back support.
I'll try to post some pix as soon as I have it mounted.
There were photos posted of a 1" Taller Corbin, but I didn't like the look...kind of like an overstuffed sofa. It had lost the clearly defined step between the front and passenger sections.
If you can wait a week or so, my 1/2" (.5") Taller Corbin should have cleared customs by then. I requested that BOTH the front and passenger sections be 1/2" taller, so hopefully, I'll still get that nice step for lower back support.
I'll try to post some pix as soon as I have it mounted.
Gumby,
Do you have some photos of your 1/2 inch taller Corbin? I'm thinking of ordering one. Thanks.
Shipment to Canada has been delayed. I just checked with my distributor (Twisted Throttle Canada), and it is now scheduled to arrive Wednesday, Aug. 12 (1 day short of 3 months since ordering). If it does show up, I should have pictures posted by Friday!
Believe me, I am very anxious to get it after enduring the terrible stock seat for over a year! The stock seat may be fine for shorter, lighter riders, but at 6'-1" and 220+ lbs, it is torture after about 45 minutes.
RE: Higher Corbin Seat - the_undecider_imp - 08-11-2015
(08-11-2015, 12:07 PM)Gumby 1100_imp Wrote:(08-11-2015, 11:54 AM)the_undecider_imp Wrote:(07-20-2015, 06:35 AM)Gumby 1100_imp Wrote:(07-20-2015, 06:30 AM)EarsOnWheels_imp Wrote: Anyone have photos of the taller seat?
There were photos posted of a 1" Taller Corbin, but I didn't like the look...kind of like an overstuffed sofa. It had lost the clearly defined step between the front and passenger sections.
If you can wait a week or so, my 1/2" (.5") Taller Corbin should have cleared customs by then. I requested that BOTH the front and passenger sections be 1/2" taller, so hopefully, I'll still get that nice step for lower back support.
I'll try to post some pix as soon as I have it mounted.
There were photos posted of a 1" Taller Corbin, but I didn't like the look...kind of like an overstuffed sofa. It had lost the clearly defined step between the front and passenger sections.
If you can wait a week or so, my 1/2" (.5") Taller Corbin should have cleared customs by then. I requested that BOTH the front and passenger sections be 1/2" taller, so hopefully, I'll still get that nice step for lower back support.
I'll try to post some pix as soon as I have it mounted.
Gumby,
Do you have some photos of your 1/2 inch taller Corbin? I'm thinking of ordering one. Thanks.
Shipment to Canada has been delayed. I just checked with my distributor (Twisted Throttle Canada), and it is now scheduled to arrive Wednesday, Aug. 12 (1 day short of 3 months since ordering). If it does show up, I should have pictures posted by Friday!
Believe me, I am very anxious to get it after enduring the terrible stock seat for over a year! The stock seat may be fine for shorter, lighter riders, but at 6'-1" and 220+ lbs, it is torture after about 45 minutes.
Shipment to Canada has been delayed. I just checked with my distributor (Twisted Throttle Canada), and it is now scheduled to arrive Wednesday, Aug. 12 (1 day short of 3 months since ordering). If it does show up, I should have pictures posted by Friday!
Believe me, I am very anxious to get it after enduring the terrible stock seat for over a year! The stock seat may be fine for shorter, lighter riders, but at 6'-1" and 220+ lbs, it is torture after about 45 minutes.
Thanks Gumby! I look forward to seeing it and hearing your ride impressions. I'm just about your height and weight, so your experience will be good feedback. I almost pulled the trigger the other day, but then I started having reservations about my choice of colors. Then, I started wondering if I needed the extra height which led me back to this thread.
RE: Higher Corbin Seat - the Ferret - 08-11-2015
Lol you certainly deserve your nickname.