+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: 3D printed strap adapters for the CB1100 mounting pegs (/showthread.php?tid=8031)
RE: 3D printed strap adapters for the CB1100 mounting pegs - peterbaron - 07-01-2022
Did someone say RLETS protectors???
RE: 3D printed strap adapters for the CB1100 mounting pegs - GoldOxide_imp - 07-01-2022
(07-01-2022, 05:19 AM)nine876_imp Wrote:3D printed RLET protectors would probably sell well around here, lol.(06-30-2022, 02:11 AM)Gone in 60_imp Wrote: This reminds me of a guy on the Ford Fiesta ST forum who has made a cottage industry from 3D printing and selling small bits for the car to forum members to solve little annoyances. One is a blocker piece to keep items from dropping into a gap around the brake handle, another is a small cup to help retrieve items from a hard-to-access portion of the center console.3D printed RLET protectors would probably sell well around here, lol.
What other convenient items can be 3D printed for the CB1100? RLETs in different colors, perhaps? My dream has always been to have someone produce the "female" mounting portions of a Givi Monokey box, so that I can attach them to any box I like and snap it in place on my Monokey rack - a vintage style briefcase, for example.
Is that like a shield for the RLET? A condom for the RLET? Or like a new generation RLET?
RE: 3D printed strap adapters for the CB1100 mounting pegs - Fenianbastard_imp - 07-01-2022
Excellent
RE: 3D printed strap adapters for the CB1100 mounting pegs - LayerCake_imp - 07-04-2022
(06-30-2022, 01:34 AM)j3gq_imp Wrote: ... and this is what it looks like :
Ahh neat to see them on other peoples bikes. Was the strap to wide for the slot or why did you leave out the middle part? I guess as long as it does hold that's also fine.
RE: 3D printed strap adapters for the CB1100 mounting pegs - Gone in 60 - 07-06-2022
I think an RLET protector would be a good idea. But then, what would protect the protector?
RE: 3D printed strap adapters for the CB1100 mounting pegs - peterbaron - 07-06-2022
I will wait with my comments until my buddy from Virginia Beach speaks up about this interesting issue
RE: 3D printed strap adapters for the CB1100 mounting pegs - GoldOxide_imp - 07-06-2022
(07-06-2022, 02:03 AM)Gone in 60_imp Wrote: I think an RLET protector would be a good idea. But then, what would protect the protector?
A ring?
Popgun: Should I have capitalized the "r" in "ring"?
RE: 3D printed strap adapters for the CB1100 mounting pegs - Cormanus - 07-06-2022
Don’t go messing with RLETs.
RE: 3D printed strap adapters for the CB1100 mounting pegs - 1973cb750 - 07-07-2022
a little nub would be had so if your strap comes loose it will kinda stay instead of just falling off just a idea it could kinda click into place
![[Image: 9b45f7e389e9234c9512d1af6b129362.jpg]](https://cb1100forum.net/forum/uploads/imp/202207/9b45f7e389e9234c9512d1af6b129362.jpg)
RE: 3D printed strap adapters for the CB1100 mounting pegs - GoldOxide_imp - 07-07-2022
(07-07-2022, 10:09 AM)1973cb750_imp Wrote: a little nub would be had so if your strap comes loose it will kinda stay instead of just falling off just a idea it could kinda click into place
Nice 'n' practical use of a 3D print job.
