![]() |
|
Oil Leak! Please help - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7) +--- Thread: Oil Leak! Please help (/showthread.php?tid=5827) |
Oil Leak! Please help - Sfomoto_imp - 05-09-2015 (05-09-2015, 02:32 AM)Lord Popgun_imp Wrote: Don't forget to put sealant in the "semi-circular cut-outs" using Three Bond 5211C or equivalent. Manual shows it going at the top of each cutout (both sides) where the cover mates with the head. I'm sure you can see where by looking before you remove the cover. Good looking out! Sent from my iPhone using Tapatalk RE: Oil Leak! Please help - ish_imp - 05-26-2015 My bike has a leak in the same area. Not sure if i should wait until i check the valves or try to fix it. Let us know how you fix the problem. My area is exactly the same. thanks -Ish RE: Oil Leak! Please help - SanPete_imp - 05-26-2015 (05-26-2015, 08:50 AM)ish_imp Wrote: My bike has a leak in the same area. Not sure if i should wait until i check the valves or try to fix it.Forgive me for butting in but I believe the fix was described on post #18. RE: Oil Leak! Please help - BestStandard_imp - 05-26-2015 Haven't figured out how to post photos yet, but my '14 DLX has a gob of clear silicone sealant at every joint between the cam cover and head at the 3:00 and 9:00 positions of all four round chrome end covers. The silicone looks bad up close and I've been meaning to try cleaning it up, but zero leaks so far. It's been there since new so Honda must have started doing it to address the oil leak problem some of you are having. It's not the type of oil you're using. I would just keep cleaning it until the cam cover has to be removed for your first valve check, then dab sealer in those areas before reinstalling the cam cover. RE: Oil Leak! Please help - Lord Popgun - 05-26-2015 Actually the sealant is, or should be, on all the engines. Its on the US 2013s and is in the service manual which says use Three Bond 5211C or equivalent. I did post that above, and no, I don't know what Three Bond 5211C is. ![]() The stuff on my bike is not clear, but yellowish. Interesting there is a difference. RE: Oil Leak! Please help - Xyzzy_imp - 05-26-2015 (05-26-2015, 12:12 PM)Lord Popgun_imp Wrote: Actually the sealant is, or should be, on all the engines. Its on the US 2013s and is in the service manual which says use Three Bond 5211C or equivalent. I did post that above, and no, I don't know what Three Bond 5211C is.I can't find it for sale in the US. I emailed the company to see if it is available here. This link shows it available in the UK. http://www.techsil.co.uk/three-bond-tb5211c-clear-silicone-sealant-330ml RE: Oil Leak! Please help - BestStandard_imp - 05-26-2015 (05-26-2015, 12:12 PM)Lord Popgun_imp Wrote: Actually the sealant is, or should be, on all the engines. Its on the US 2013s and is in the service manual which says use Three Bond 5211C or equivalent. I did post that above, and no, I don't know what Three Bond 5211C is. The sealant on my DLX looks and feels exactly like dried clear silicone sealant... I have no idea what the Three Bond stuff is either!! RE: Oil Leak! Please help - Lord Popgun - 05-26-2015 Well, again Google is my friend. Apparently, Three Bond is a clear silicone sealant. Wonder why mine is yellowish? Anyway here is a link to more than you will want to know about it: http://www.techsil.co.uk/three-bond-tb5211c-clear-silicone-sealant-330ml RE: Oil Leak! Please help - kevbroce_imp - 05-27-2015 Just tighten the bolt at the top of your picture. Solved my problem. RE: Oil Leak! Please help - Lord Popgun - 05-27-2015 Sorry Xyzzy, I guess I didn't notice you posted the link that I did. Reading is fundamental
|