The CB1100 Community Forum
Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? (/showthread.php?tid=5803)

Pages: 1 2 3

RE: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - Xyzzy_imp - 06-18-2015

I have absolutely no problem using a master link. I safety wire mine on. Like oil debates, you can really get a lot of fighting about master links versus staked links, so I will not go into any of that except to post a picture showing how one might go about securing a master link.

[Image: 1c8eb4b3c99047eedbabe4f5a5333149.gif]



RE: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - Pterodactyl_imp - 06-18-2015

Just to add to the discussion, I might go Z-ring.

Some manufacturers, Regina for example, supply a clip but recommend for 500cc or less. Otherwise stake the chain. I guess if you ride a 500 with a lot of power you would know what is right for the bike.

Cheers

RE: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - furious_blue_imp - 06-19-2015

(06-18-2015, 12:39 PM)Xyzzy_imp Wrote: I have absolutely no problem using a master link. I safety wire mine on. Like oil debates, you can really get a lot of fighting about master links versus staked links, so I will not go into any of that except to post a picture showing how one might go about securing a master link.

[Image: 1c8eb4b3c99047eedbabe4f5a5333149.gif]

yep ++1

I would never use a master link chain without securing the clip like that.
I had one ruined vacation on a Nighthawk 750 in which I cheaped out and used a master link chain without securing it... (and yes, the clip was installed properly with the beveled side facing the way that it is supposed to)...

RE: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - Pterodactyl_imp - 06-20-2015

(06-17-2015, 09:13 PM)The ferret_imp Wrote: Oh wow, I thought that was the new slider pad (looks new to me). Yea that appears good for a lot more miles.

G'day (or good morning) Ferret. I've posted a further photo of my chain slider below. It shows some "chain rash" on the top surface. I'm just curious as how this compares with your and other members' CBs. It should be visible without too much dis-assembly, just the chain guard.

[Image: 096c810658f20517d16e6e57a419256a.jpg]

Cheers all.

RE: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - Cormanus - 06-20-2015

Is that the bit in the middle where the chain is slackest? If so, I suspect that's always going to be the bit that cops most wear and I wonder how much life it has left in it.

RE: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - Pterodactyl_imp - 06-20-2015

(06-20-2015, 06:59 PM)Cormanus_imp Wrote: Is that the bit in the middle where the chain is slackest? If so, I suspect that's always going to be the bit that cops most wear and I wonder how much life it has left in it.

Plenty. How's yours?

Cheers

Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - Cormanus - 06-20-2015

Given I'm a bit of an old slapper, it's anyone's guess.

Cheers to you

RE: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - Pterodactyl_imp - 06-20-2015

"Slapper". I like it Smile.

RE: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - the Ferret - 06-21-2015

Here's mine Ptero..just over 13000 miles

[url=http://smg.photobucket.com/user/theferret111/media/Fathers%20Day%202015%20012_zps5qtvt6xc.jpg.html][Image: 3286652e0a17fb9d282ab42b5247067d.jpg]

RE: Here's the Driven Sprocket and Slider. Chain - go X or O-ring? - Pterodactyl_imp - 06-21-2015

Thanks Ferret. Looks as though it might have a little "chain rash", similar to mine. Still plenty of meat though.

Cheers.