![]() |
|
Bikes "Happy Place" - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7) +--- Thread: Bikes "Happy Place" (/showthread.php?tid=5778) |
RE: Bikes "Happy Place" - CB4ME_imp - 07-15-2015 Way back in 2013 when the CB was finally offered in the US, some riders reported a bit of vibration at 4000 rpm in 5th gear/70 mph. I observed the same thing. Some folks, including myself, changed sprockets to reduce rpm. I went up one tooth in the front and down one in the rear. Now 4000 rpm in 5th occurs at 76 mph. I don't notice the vibration as much, perhaps of the increased speed. RE: Bikes "Happy Place" - Cormanus - 07-15-2015 (07-14-2015, 10:49 PM)kDiqq_imp Wrote:(07-14-2015, 04:51 AM)treytexag_imp Wrote:(07-14-2015, 02:58 AM)kDiqq_imp Wrote: Haha I've been running my bike like I stole it since I got it. I read a lot on engines breaking in and some of the technology used nowadays to hone and bore jugs. A lot of guys believe the 'wait 600 miles' is a carry-over from when machining practices were more primitive. I tend to believe it. I was sold when I read a study a guy who builds dirtbikes did. He took several bikes and instructed owners to beat on them as hard as possible at 0 miles and others to follow the break in procedure. The ones beat on dynoed more power and had more apparent cross-hatching left in the bores. No loss in longevity was ever observed. You know, in spite of the care you took, you probably frightened her. She was busy staring into space, sending a text, fiddling with the radio or the GPS and had no idea at all you were there until you materialised in front of her. The great challenge for contemporary road safety authorities is to find a way to make sure drivers (and riders) are attending to the job of driving (or riding) amidst the growing number of available distractions. RE: Bikes "Happy Place" - Motogeezer1949_imp - 07-15-2015 Practically to the point where one needs a Go-Pro just to be safe. RE: Bikes "Happy Place" - Inhouse Bob - 07-15-2015 (07-15-2015, 09:42 AM)Motogeezer1949_imp Wrote: Practically to the point where one needs a Go-Pro just to be safe. Or if not safe, at least litigiously prepared. RE: Bikes "Happy Place" - Motogeezer1949_imp - 07-15-2015 Yep, I'm pretty careful when riding. With cell phone cameras so abundant you can never be sure when you might be starring in the next popular You Tube viral video
RE: Bikes "Happy Place" - dave - 07-15-2015 You may have your road rage in Houston, but I don't think it can top what happened in San Diego last month. A young marine (or maybe sailor) driving a motorcycle (not sure what kind) got into an incident on highway 5N with a woman in a car. He ended up kicking her car, then exiting at the 54E exit quickly. She followed him and ran him down, and killed him. There's a big, black skid mark on the freeway where she must have pushed him about 200 yards. Her defense is that he fell off his bike and she accidently ran him over, but the witnesses at the scene saw her deliberately ram him and never hit the brakes; she was arrested at the scene and has been charged with murder. There's probably something on the internet if you care to Google it. RE: Bikes "Happy Place" - DGShannon_imp - 07-18-2015 (07-14-2015, 04:51 AM)treytexag_imp Wrote:(07-14-2015, 02:58 AM)kDiqq_imp Wrote: Haha I've been running my bike like I stole it since I got it. I read a lot on engines breaking in and some of the technology used nowadays to hone and bore jugs. A lot of guys believe the 'wait 600 miles' is a carry-over from when machining practices were more primitive. I tend to believe it. I was sold when I read a study a guy who builds dirtbikes did. He took several bikes and instructed owners to beat on them as hard as possible at 0 miles and others to follow the break in procedure. The ones beat on dynoed more power and had more apparent cross-hatching left in the bores. No loss in longevity was ever observed. What part of town are you in? I am on SE side, in Pearland. Fair number of nice back roads down this way. Anywhere close to each other, and we should meet up some weekend. RE: Bikes "Happy Place" - drodg33 - 07-21-2015 2500-3500 RE: Bikes "Happy Place" - DAC - 07-21-2015 (07-15-2015, 09:42 AM)Motogeezer1949_imp Wrote: Practically to the point where one needs a Go-Pro just to be safe.And a ball-peen hammer! RE: Bikes "Happy Place" - Django - 07-21-2015 Commuting or warm up: 2,500-4,000 Autobahn: 5,000 Happy place having fun: 5,000-8,500.
|