+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Instrument Cluster A & B Button Repair (/showthread.php?tid=4525)
RE: Instrument Cluster A & B Button Repair - Lord Popgun - 08-11-2021
Hey PB, I can find them on the Honda parts fiche easily
RE: Instrument Cluster A & B Button Repair - peterbaron - 08-11-2021
(08-11-2021, 12:54 AM)Lord Popgun_imp Wrote: Hey PB, I can find them on the Honda parts fiche easily
MiLord, I acknowledge your thought...3D print out needed
RE: Instrument Cluster A & B Button Repair - GoldOxide_imp - 08-11-2021
(08-10-2021, 10:48 PM)Phadreus_imp Wrote:It takes real talent to trip going up stairs.(08-10-2021, 08:37 PM)Cormanus_imp Wrote: I'm impressed:It takes real talent to trip going up stairs.
(a) with your diagnosis and repair; and
(b) you survived tripping on the stairs.
Nice work all round.
Thx Cormanus!
(08-10-2021, 08:56 PM)Houtman_imp Wrote: I am very impressed that you " pinned" the problem so cheaply .Wah wah wah...it was really more of a MacGyver operation truth be told.
...
Heh, heh - Put on cold weather riding boots, put on the full face helmet, shield closed, and heck, put on the cold weather jacket. Proceed to walk up a full flight of stairs.
RE: Instrument Cluster A & B Button Repair - j3gq_imp - 08-11-2021
Phadreus dateline='nip>k' Wrote: [url=http://cb1100forum.com/forum/showthread.php?pid=302708#pid302708] cut some Round Stock to the correct length, and inserted them into the Cluster. Viola!
Did you put the sticks in exactly as shown in the picture ? It seems the ends were cut with a plier ...
RE: Instrument Cluster A & B Button Repair - Phadreus_imp - 08-11-2021
(08-11-2021, 06:48 AM)j3gq_imp Wrote: Phadreus dateline='nip>k' Wrote: [url=http://cb1100forum.com/forum/showthread.php?pid=302708#pid302708] cut some Round Stock to the correct length, and inserted them into the Cluster. Viola!
Did you put the sticks in exactly as shown in the picture ? It seems the ends were cut with a plier ...
Did you put the sticks in exactly as shown in the picture ? It seems the ends were cut with a plier ... Good eye, they were in their initial rough cut form when I took the picture. I did cut them with side cuts (it was .080" round stock, mild steel), then ran them across my bench grinder to smooth out, debur the ends. Didn't want the membranes or micro switches damaged.
RE: Instrument Cluster A & B Button Repair - NHCB1100_imp - 08-11-2021
I have a damaged cluster that I can take apart and send you the rods if you like. Just let me know. From a 2014 bike.
RE: Instrument Cluster A & B Button Repair - Phadreus_imp - 08-11-2021
(08-11-2021, 09:38 AM)NHCB1100_imp Wrote: I have a damaged cluster that I can take apart and send you the rods if you like. Just let me know. From a 2014 bike.I would absolutely take you up on that! Admittedly, I would absolutely prefer factory parts inside. Also, I think I damaged my right turn signal indicator LED in the process. Didn't notice it until I rode today, and noticed LH works fine, RH, no blinky. I'm betting I caused it during my repair process unknowingly. Can't find any indication if it's a 3.5V, 3.7V, 5V...was thinking I could find another PCB somewhere and move one of the LED's over. I'll PM ya!
RE: Instrument Cluster A & B Button Repair - Ninemeister_imp - 08-12-2021
Good job. From what I recall the pins just fall out when you take it apart, so I can see how they were misplaced on a prior assembly and I guess the guy couldn't be bothered to do the job twice?
I should have a couple of spare pins from a used cluster I broke for parts on my K10 build. Just shout if you want me to post them.
RE: Instrument Cluster A & B Button Repair - Phadreus_imp - 08-12-2021
(08-12-2021, 10:23 PM)Ninemeister_imp Wrote: Good job. From what I recall the pins just fall out when you take it apart, so I can see how they were misplaced on a prior assembly and I guess the guy couldn't be bothered to do the job twice?Thanks Nine! I think NHCB1100 (John) is fixing me up with everything I need. Will be nice to have the factory designed parts back in place. I'll feel like everything is right in the Universe again.
I should have a couple of spare pins from a used cluster I broke for parts on my K10 build. Just shout if you want me to post them.
I wish I knew why the original owner disassembled the cluster in the first place...very curious.
RE: Instrument Cluster A & B Button Repair - the Ferret - 08-13-2021
There are some good, kind and generous people on this forum.