+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: CB1100 Reference (https://cb1100forum.net/forum/forumdisplay.php?fid=10)
+--- Forum: CB1100 Photos & Videos (https://cb1100forum.net/forum/forumdisplay.php?fid=49)
+--- Thread: Seven days and four states (/showthread.php?tid=12292)
RE: Seven days and four states - Lord Popgun - 04-30-2019
Max, interesting observation. I checked mine and the cast writing is on the left side too.
The service manual shows that the rotors have a direction arrow. It is by one of the rotor mounting bolts. I looked at mine and it is easy to see. And is the easy way to see if the wheel is on correctly (if it can even be put on reversed).
In any case, look at the rotor arrows!
RE: Seven days and four states - max - 04-30-2019
Thanks Popgun, i completely missed the rotor arrows
That is a good find and a great deal better than my text story!
RE: Seven days and four states - zbillster_imp - 04-30-2019
This has to be my favorite vehicle forum EVER!
Sure enough, wheel is on backwards ...
![[Image: 35ae32a1503720d3f9ce10ac50b5df4c.jpg]](https://cb1100forum.net/forum/uploads/imp/201904/35ae32a1503720d3f9ce10ac50b5df4c.jpg)
Honda of the Ozarks called and is paying my local Honda shop to install it correctly. So this headache is almost over ...
It's been on there for 3000 miles. My tire install guy says it's not a biggie on dry but affects water channeling when wet.
Here's my tire install guy's site ... giving him a shoutout:
http://www.rsp-mmts.com/
RE: Seven days and four states - Lord Popgun - 04-30-2019
And now we know the wheel can be installed backwards
I wonder if the back wheel can be installed backwards?
Glad you figured out the problem. At least it is an easy fix.
RE: Seven days and four states - zbillster_imp - 04-30-2019
(04-30-2019, 09:37 AM)Lord Popgun_imp Wrote: And now we know the wheel can be installed backwards
I wonder if the back wheel can be installed backwards?
Glad you figured out the problem. At least it is an easy fix.
I wonder if this will affect the rotor wear? Hmmm ...
RE: Seven days and four states - Lord Popgun - 04-30-2019
I doubt it. Ride more, worry less.
RE: Seven days and four states - GoldOxide_imp - 04-30-2019
Any noticeable difference in the front brake behaviour?
RE: Seven days and four states - flynrider - 04-30-2019
(04-30-2019, 09:37 AM)Lord Popgun_imp Wrote: And now we know the wheel can be installed backwards
I wonder if the back wheel can be installed backwards?
Glad you figured out the problem. At least it is an easy fix.
I did that (and posted about it somewhere on the site). My first PR3 front tire was mounted off bike. When I took it home and mounted it, I just assumed that the angle of the tread pattern should be pointing forward. Months (and a few thousand miles) later, I parked next to a bike at work with a PR3 front and the tread pattern was the other way around. I initially assumed his tire was on backwards, but I did bother to look at the arrow and realized that mine was. I never noticed any difference in handling or braking while it was on backwards. It only took about 20 min. to flip the wheel around to the proper orientation.
BTW, I can't remember who it was, but at the '17 West Coast Rally I spotted a backwardly mounted PR3 on one of the attending CBs. With it's weird tread pattern, it's an easy mistake to make.
This is what a correctly mounted PR3 looks like
![[Image: 83be45f76e422e7a44896606dc35637d.jpg]](https://cb1100forum.net/forum/uploads/imp/201904/83be45f76e422e7a44896606dc35637d.jpg)
RE: Seven days and four states - the Ferret - 05-01-2019
So if you put the tire on backwards and then mounted the wheel backwards, would it be right again? lol
RE: Seven days and four states - Lord Popgun - 05-01-2019
Hey Ferret, not for you!! Your pulser ring would be on the wrong side.
