+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: engine guards or sliders (/showthread.php?tid=9978)
Pages:
1
2
RE: engine guards or sliders - gossman_imp - 01-14-2015
(01-14-2015, 12:08 AM)Lord Popgun_imp Wrote: ferret,
Those sliders are EASY to install, but the instructions aren't much help. I installed mine with the spacers on the wrong sides of the bike. Rode it like that for a while until I confirmed I had it wrong by looking at another members pic!
Pretty easy to do. I sat and stared at the pics, the bike, and the pics again. Put them on, thinking I should only pull one bolt at a time and replace that bolt before removing the next. I can easily see someone who hasn't wrenched for a lifetime remove both at the same time and have some difficulties getting it back together. I put plenty of Ikea style crap together for the private school I volunteer at so I'm fairly good with poor instructions and figuring things out, I just need time to look and think.
engine guards or sliders - Elipten_imp - 01-14-2015
If those chrome instrument covers cause a challenge, then you have some serious issues. LOL. And same for the headlight bucket. I would cost the headlight bucket before starting with blue painters trim tape to prevent scratching. Just saying that is the risk
Sent from my iPad using Tapatalk
RE: engine guards or sliders - cosmos_imp - 01-18-2015
here's my take on the kajima engine gurds http://cb1100forum.com/forum/showthread.php?tid=3172