+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Yoshimura machine bent exhaust (/showthread.php?tid=9635)
Pages:
1
2
RE: Yoshimura machine bent exhaust - CIP57_imp - 07-30-2015
(07-30-2015, 12:51 PM)EmptySea_imp Wrote: I'd like someone with a 2013 and a 2014 std with stock exhausts to measure the clearance at a couple of spots so those of us with Yosh systems can compare. I would expect the clearance on both the 2013 and 2014 stock exhaust to be the same, but I suppose that there could have been some differences.
Have two friends lay the bike over while you check clearance. FYI mine never touched down.
RE: Yoshimura machine bent exhaust - Toddman_imp - 07-30-2015
Add a couple of clicks (preload) to your rear suspension and increase your front preload by one line. Get some black heat paint and touch up that pipe. Increase the suspension by increments if need be.
RE: Yoshimura machine bent exhaust - Redbird_imp - 07-31-2015
As a sidenote, what fairing do you have on your bike?
RE: Yoshimura machine bent exhaust - emptysea - 09-14-2015
Scraped my Yoshimura pipe tonight. Going to try some suspension adjustments, but this is the first time it's happened in the 5000+ riding miles I have with this exhaust so the follow up report could take a year or so.
RE: Yoshimura machine bent exhaust - veech_imp - 09-15-2015
EmptySea, sorry to hear about the pipe. But, that is only a minor thing, and on the bright side it means your riding skills are getting better! You are now officially a wildman!
RE: Yoshimura machine bent exhaust - emptysea - 09-15-2015
Thanks, veech. It's more likely that my weight has increased faster than my skills. To follow up a bit, I talked to Fred The Service Guy and he seems not to be too worried about dragging the pipe so I'm not going to be, either.