+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Dart Fly Screen (/showthread.php?tid=9537)
Pages:
1
2
RE: Dart Fly Screen - Lord Popgun - 12-16-2015
I think that's how we all did it. Adhesive, not those stupid plastic rivits that came with it.
Interesting to hear you scored the Extenda. I wiped the mating surface of mine with acetone to deglaze it then scored it up good. Might have sanded the fender some too, but it was 3 years ago and I can't remember.
RE: Dart Fly Screen - drodg33 - 12-16-2015
Thank you
RE: Dart Fly Screen - Rocky_imp - 12-16-2015
(12-16-2015, 04:26 AM)Paulb_imp Wrote: Just a tip for fitting the Fenda Extenda to keep it looking clean. I ditch the screws and use Araldite. Clean the fender and score the Extenda and clamp in place over night.
Good advice. I have the Extenda fitted too without screws for a cleaner and neater look.
I removed the fender, made sure everything was clean, roughed the Extenda with sandpaper and used J-B Weld clamped overnight.
I did the same thing with my CB900F ten years ago and it has never moved.